User manual FUJITSU SIEMENS SCENIC PT/PS/PD 3XX/4XX

[. . . ] Please contact: · your sales partner · your sales outlet The latest information and updates (e. g. BIOS update) on our mainboards can be found on the Internet under: http://www. fujitsu-siemens. com/mainboards Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. [. . . ] Otherwise the retaining clips of the heat sink will be damaged. When using an "Intel Boxed" heat sink, the mainboard must be converted. This conversion set is either included with the mainboard or is available separately. If no counter-plate is mounted, you can use both "Intel Boxed" heat sinks and standard heat sinks. If you use the "Intel Boxed" heat sink, the mainboard will bend due to the high pressure of the retaining clips. This behaviour is specified by Intel. Ê Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it. Depending on the processor variant, clips may also be supplied for mounting the heat sink that fix it in place. When you have mounted the optional fan, connect the fan plug to the corresponding connection on the mainboard. Ê Ê A26361-D1522-Z120-3-6319 English - 17 Add-on modules / Upgrading Upgrading main memory Technical data Technology: Total size: Granularity: DDR 266 or DDR 333 unbuffered DIMM modules 184-pin; 2. 5 V; 64 Bit, no ECC 128 Mbytes up to 2 Gbyte DDR-SDRAM 32, 64, 128, 256, 512 or 1024 Mbyte for one socket A current list of the memory modules recommended for this mainboard is available on the Internet at: www. fujitsu-siemens. de/mainboards. At least one memory module must be installed. Memory modules with different memory capacities can be combined. ! You may only use unbuffered 2, 5 V memory modules. Buffered memory modules are not supported. The plus pole must be on the top! The lithium battery holder exists in different designs that function in the same way. 2 3 3 2 1 3 Ê Ê Ê Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1). Insert a new lithium battery of the same type into the socket (3). A26361-D1522-Z120-3-6319 English - 21 Add-on modules / Upgrading BIOS update When should a BIOS update be carried out?Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new operating systems, new software or new hardware. In addition, new BIOS functions can also be integrated. A BIOS update should always also be carried out when a problem exists that cannot be solved with new drivers or new software. The BIOS updates are available on the Internet at www. fujitsu-siemens. de/mainboards. BIOS update under DOS with bootable BIOS update floppy disk - brief description Ê Ê Ê Ê Ê Ê Download the update file from out website to your PC. A bootable update floppy disk is created. Follow the instructions on screen. i Detailed information on the BIOS update under DOS is provided in the manual on "BIOS Setup" ("Drivers & Utilities" CD). 2. BIOS update under Windows with DeskFlash utility A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash is located on the "Drivers & Utilities" CD (from CD version 2001. 05 with DeskViewOEM V5. 0). [. . . ] Check whether you have assigned the same device ID twice. xy = Group number x = Number of SEs found on the communication bus y = Number of SEs entered in Number of connected SE k1, k2 . . . = Device ID of the storage extensions found 30 - English A26361-D1522-Z120-3-6319 Error messages System battery is dead - Replace and run SETUP Replace the lithium battery on the mainboard and redo the settings in the BIOS Setup. System Cache Error - Cache disabled Switch the device off and on again. [. . . ]