User manual FUJITSU SIEMENS SCENIC T (I845)

[. . . ] This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. [. . . ] It allows you to limit access to the system. IDE HDD Auto Detection Automatically configure hard disk parameters. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. A26361-D1596-Z121-1-7619 English - 19 BIOS Setup Standard CMOS Features AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 2001 American Megatrends, Inc. All Rights Reserved System Date : Jul 01 2002 Mon System Time : 16:10:49 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Pri Slave : Sec Master : Sec Slave : Auto Auto Auto Auto Floppy Drive A : 1. 44 MB 31/2 Floppy Drive B : Not Installed Virus Protection : Disabled Date is standard format Month: Jan - Dec Day: 01- 31 Year: 1990 - 2099 Base Memory: Other Memory: Extended Memory: Total Memory: 640 Kb 384 Kb 127 Mb 128 Mb ESC : Exit !" : Select Item PU / PD / + / - : Modify (Shift) F2 : Color Date The date format is <week>, <month>, <day>, <year>. Week Month Day Year The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1990 through 2099 Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military time clock. is 13:00:00. 20 - English A26361-D1596-Z121-1-7619 BIOS Setup Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual: type is user-definable; Auto: will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Ê Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. Note that BIOS can not tell from 720K, 1. 2M or 1. 44M drive type as they are all 80 tracks. BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360K. (Default value) BootUp Num-Lock Off On When bootup, setting keypad is arrow keys When bootup, setting keypad is number keys. (Default value) Password Check Please refer to the detail on Password Check. Setup Always The user must enter correct password in order to access BIOS setup utility (Default Value) The user must enter correct password in order to access the system and/or BIOS Setup. S. M. A. R. T. for Hard Disks Enabled Disabled Enable HDD S. M. A. R. T. Capability. APIC Interrupt Mode APIC PIC Through IOAPIC generate more IRQ for system use. (Default Value) Use AT standard IRQ controllers to generate IRQ. When you already have IOAPIC enable system and want to upgrade the system please note, since running an IOAPIC enabled OS (like Windows NT, Windows 2000, Windows XP. . . ) system with none IOAPIC HW support will cause the system to hang. Following are some situations users might run into: 1. An IOAPIC enabled OS and change the BIOS setting from IOAPIC to PIC, this will cause your system to hang. 24 - English A26361-D1596-Z121-1-7619 BIOS Setup Chipset Features Setup We would not suggest you change the chipset default setting unless you really need it. AMIBIOS SETUP - CHIPSET FEATURES SETUP ( C ) 2001 American Megatrends, Inc. [. . . ] To disable password, just press <Enter> when you are prompted to enter password. A message You will be asked to confirm the password. "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: a SUPERVISOR PASS WORD and a USER PASSWORD. [. . . ]