User manual FUJITSU SIEMENS SCENIC T (I845D)

[. . . ] Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2001 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. [. . . ] All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Right of technical modification reserved. Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power supply monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Intrusion connector for case open detect for optional push-button (opener) . . . . . . . . . . . . . . . . . . . . . . . 5 Serial port 2 (COM 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front panel connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fan 2 connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wake On LAN (WOL) connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 USB port C, D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CD-ROM audio connector (internal). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Auxiliary (MPEG, TV) audio connector (internal). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Fan 1 connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Functions controlled by the configuration switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power loadability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Installing drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Upgrading main memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 2 2 1 3 2 1 1/1 1 1/ü 2/2 1 3 2 1 1/1 1 1/ü 2/2 1 3 1 2 1 1/1 1 1/2/1 µ-ATX ü ü ü/ü/D1214-A D1215-A D1216-B Intel 815E µ-ATX ü ü ü/ü ü ü ü -/ü µ-ATX ü -/ü/- 2 - English A26361-D1216-Z181-1-7619 Mechanics Mechanics Layout µATX 9. 6" x 8'' (243. 84 mm x 203. 2 mm) Some of the following connectors are optional and may therefore not be included on your system board. 1 3 5 8 2 4 6 7 9a9b9c 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port LAN port USB ports A and B Parallel port Serial port 1 7 = VGA port 8 = Game/Midi port 9a = Audio Line-Out Headphones 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked are not necessarily present on the system board. A26361-D1216-Z181-1-7619 English - 3 Mechanics 12 34 5 6 78 9 10 DIMM 2 DIMM 1 15 14 AGP 11 PCI 1 PCI 2 PCI 3 13 12 1= 2= 3= 4= 5= 6= 7= 8= Power supply monitoring Cover monitoring Serial port 2 Power supply Floppy disk drive IDE drives 3 and 4 (secondary) IDE drives 1 and 2 (primary) Connector for control panel 9 = Fan 2 (e. for the system fan supervised) * 10 = Wake On LAN 11 = USB ports C / D 12 = CD audio input 13 = AUX audio input 14 = Voltage indicator 15 = Fan 1 (e. for the processor) The components and connectors marked are not necessarily present on the system board. *) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector only. 4 - English A26361-D1216-Z181-1-7619 CNR Mechanics Connectors ! Some of the following connectors are optional! Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal Monitor on PS FAN control (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) A26361-D1216-Z181-1-7619 English - 5 Mechanics Serial port 2 (COM 2) external via optional cable 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 SIN 2 SOUT 2 DTR 2 GND EXT SMI (TTL - Signal, low asserted) RESET (TTL - Signal, low asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 RTS 2 CTS 2 PC_On_Strobe (TTL - Signal, low asserted) VCC Auxiliary VCC GND Key 6 - English A26361-D1216-Z181-1-7619 Mechanics Front panel connector Power On/Off 1) Reset 1) Message LED Sleep LED Power On 1) LED 1) 3) HD-LED 1 2 1) Sleep SCSI LED Input 1) 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) reserved Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Not connected Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). A26361-D1216-Z181-1-7619 English - 7 Mechanics Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND +12 V Fan sense 1 Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) USB port C, D 1 2 Pin 1 Signal VCC Dual (fused max. 500mA and power supervision with over current detection) Data negative Data positive GND Shield GND Pin 2 Signal Shield GND 3 5 7 9 4 6 8 10 GND Data positive Data negative VCC Dual (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 11 Key 12 8 - English A26361-D1216-Z181-1-7619 Mechanics CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0 V / 6. . . 12 V) Fan sense A26361-D1216-Z181-1-7619 English - 9 Mechanics Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4. Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5. 0 V +12 V -12 V +3. 3 V +5. 0 V Maximum variation ±5 % ±5 % ±10 % ±5 % ±5 % Maximum current 15 A 350 mA 200 mA 4A 2A Comment Power loadability Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port Universal serial bus (USB) Port A Universal serial bus (USB) Port B Maximum function current Not specified Not specified Not specified 500 mA 500 mA 2 3 500 mA 500 mA 10 - English A26361-D1216-Z181-1-7619 Documentation Documentation Ê Ê Ê Ê Ê Ê Insert the "Drivers & Utilities" CD. [. . . ] 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 11 Key 12 8 - English A26361-D1216-Z181-1-7619 Mechanics CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0 V / 6. . . 12 V) Fan sense A26361-D1216-Z181-1-7619 English - 9 Mechanics Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4. Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5. 0 V +12 V -12 V +3. 3 V +5. 0 V Maximum variation ±5 % ±5 % ±10 % ±5 % ±5 % Maximum current 15 A 350 mA 200 mA 4A 2A Comment Power loadability Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port Universal serial bus (USB) Port A Universal serial bus (USB) Port B Maximum function current Not specified Not specified Not specified 500 mA 500 mA 2 3 500 mA 500 mA 10 - English A26361-D1216-Z181-1-7619 Documentation Documentation Ê Ê Ê Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START. EXE file in the main directory of the CD. Select your system board or your device. [. . . ]