User manual FUJITSU SIEMENS SCENIC W600 (I845GE)

[. . . ] "   #  $   % &' ()*+, -.  / 01  2  ' &' 344 3544 A26361-D1131-Z180-1-7619 English System board D1131 Additional Technical Manual April 1999 edition Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. [. . . ] All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Right of technical modification reserved. Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connectors and Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Internal serial (COM2) port (external via wire) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Power supply ATX connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wake on LAN (WOL) connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utility" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers and utilities". Features Function Processor Chipset DIMM sockets Main memory up to ISA slots PCI slots ISA/PCI shared AGP Port System monitoring Thermal Management Wake On LAN (WOL) Keyboard On IrDA Chipcard Reader Save to Disk Save to RAM IAPC *: Front Side Bus Version G1x PGA 370 or Celeron 440 ZX / 66 MHz FSB* 2 256 Mbyte 0 2 1 1 --X ---X --- ! Computer mainboards and components contain very delicate IC chips. To protect them against damage caused from electric static, you have to follow some precautions: · · · Unplug your computer when you work inside. Hold components by the edge, don't touch their leads. Use a grounded wrist strap. Place the mainboard and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i. e. the thin plastic plate between battery and contact spring). A26361-D1131-Z180-3-7619 English - 1 Mechanics Mechanics Layout µ-ATX 9, 6" x 8'' (243, 84 mm x 203, 2 mm) Some of the following connectors are optional and may therefore not be included on your mainboard. DIMM 2 DIMM 1 AGP PCI 3 PCI 2 2 5 1 1 = Serial port 1 2 = PS/2 mouse port 3 = PS/2 keyboard port 3 4 6 4 = Parallel interface 5 = USB connection 2 6 = USB connection 1 2 - English A26361-D1131-Z180-3-7619 PCI 1 ISA Mechanics 1 2 3 45 6 7 DIMM 2 DIMM 1 10 AGP 9 PCI 3 PCI 2 8 1 = Serial chipcard reader interface or serial port 2 2 = Power supply 3 = Floppy disk drive 4 = IDE drives 3 and 4 (secondary) 5 = Wake On LAN 6 = Connector for control panel 7 = IDE drives 1 and 2 (primary) 8 = ON/OFF switch 9 = Fan 1 (e. for the processor) The components and connectors marked do not have to be present on the system board. PCI 1 A26361-D1131-Z180-3-7619 ISA English - 3 Mechanics Connectors and Jumpers ! Some of the following connectors are optional! Internal serial (COM2) port (external via wire) 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 (low asserted) SIN 2 (high asserted) SOUT 2 (high asserted) DTR 2 (low asserted) GND EXT SMI (low asserted) RESETDRV (high asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 (low asserted) RTS 2 (low asserted) CTS 2 (low asserted) PC_ON_Strobe VCC Auxiliary VCC GND Key Power supply ATX connector 20 11 10 Pin 1 3 5 7 9 11 13 15 17 19 Signal +3. 3 V GND GND GND +5 V Auxiliary +3. 3 V GND GND GND +5 V Pin 2 4 6 8 10 12 14 16 18 20 Signal +3. 3 V +5 V +5 V Powergood (high asserted) +12 V -12 V PS on (low asserted) GND -5 V +5 V 1 4 - English A26361-D1131-Z180-3-7619 Mechanics Wake on LAN (WOL) connector 1 Pin 1 2 3 Signal +5 V Auxiliary GND Wake pulse (high asserted) Front panel connector Reset 1) HD-LED 1) Power On LED 1) 1 2 Power On/Off SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Boot Lock Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Not connected Not connected Key Anode HD_LED Cathode HD_LED GND Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key pin Key Not connected SCSI LED Input SCSI LED Input Not connected Key GND GND GND A26361-D1131-Z180-3-7619 English - 5 Mechanics Power on switch connector (ON/OFF switch) Pin 1 2 Signal GND Power on pulse (low asserted) 1 Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0. . . +12 V) Not connected Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense Configuration Celeron (PGA 370) processors core frequency (300 - 433 MHz) i The clock frequency of the processor is set automatically. 6 - English A26361-D1131-Z180-3-7619 Installing Drivers Functions controlled by the switch block Function Password Skip Off Recovery BIOS Off Floppy write protect Off SW1 on off X X X X SW2 X X on off X X SW3 X X X X on off SW4 X X X X X X i Switch 4 (SW4) is reserved! Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5. 0 V +12 V -12 V +3. 3 V +5. 0 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % Maximum current Comment 15 A 300 mA 100 mA 4A 50 mA 670 mA Wake on LAN Power loadability Fuse number 1 Maximum Fuse current 750 mA Function Universal serial bus (USB) Port A Keyboard Mouse Universal serial bus (USB) Port B Maximum function current 500 mA Not specified Not specified 500 mA 2 750 mA Installing Drivers Insert the "Drivers & Utilities" CD. [. . . ] the thin plastic plate between battery and contact spring). A26361-D1131-Z180-3-7619 English - 1 Mechanics Mechanics Layout µ-ATX 9, 6" x 8'' (243, 84 mm x 203, 2 mm) Some of the following connectors are optional and may therefore not be included on your mainboard. DIMM 2 DIMM 1 AGP PCI 3 PCI 2 2 5 1 1 = Serial port 1 2 = PS/2 mouse port 3 = PS/2 keyboard port 3 4 6 4 = Parallel interface 5 = USB connection 2 6 = USB connection 1 2 - English A26361-D1131-Z180-3-7619 PCI 1 ISA Mechanics 1 2 3 45 6 7 DIMM 2 DIMM 1 10 AGP 9 PCI 3 PCI 2 8 1 = Serial chipcard reader interface or serial port 2 2 = Power supply 3 = Floppy disk drive 4 = IDE drives 3 and 4 (secondary) 5 = Wake On LAN 6 = Connector for control panel 7 = IDE drives 1 and 2 (primary) 8 = ON/OFF switch 9 = Fan 1 (e. for the processor) The components and connectors marked do not have to be present on the system board. PCI 1 A26361-D1131-Z180-3-7619 ISA English - 3 Mechanics Connectors and Jumpers ! Some of the following connectors are optional! Internal serial (COM2) port (external via wire) 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 (low asserted) SIN 2 (high asserted) SOUT 2 (high asserted) DTR 2 (low asserted) GND EXT SMI (low asserted) RESETDRV (high asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 (low asserted) RTS 2 (low asserted) CTS 2 (low asserted) PC_ON_Strobe VCC Auxiliary VCC GND Key Power supply ATX connector 20 11 10 Pin 1 3 5 7 9 11 13 15 17 19 Signal +3. 3 V GND GND GND +5 V Auxiliary +3. 3 V GND GND GND +5 V Pin 2 4 6 8 10 12 14 16 18 20 Signal +3. 3 V +5 V +5 V Powergood (high asserted) +12 V -12 V PS on (low asserted) GND -5 V +5 V 1 4 - English A26361-D1131-Z180-3-7619 Mechanics Wake on LAN (WOL) connector 1 Pin 1 2 3 Signal +5 V Auxiliary GND Wake pulse (high asserted) Front panel connector Reset 1) HD-LED 1) Power On LED 1) 1 2 Power On/Off SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Boot Lock Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Not connected Not connected Key Anode HD_LED Cathode HD_LED GND Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key pin Key Not connected SCSI LED Input SCSI LED Input Not connected Key GND GND GND A26361-D1131-Z180-3-7619 English - 5 Mechanics Power on switch connector (ON/OFF switch) Pin 1 2 Signal GND Power on pulse (low asserted) 1 Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0. . . +12 V) Not connected Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense Configuration Celeron (PGA 370) processors core frequency (300 - 433 MHz) i The clock frequency of the processor is set automatically. 6 - English A26361-D1131-Z180-3-7619 Installing Drivers Functions controlled by the switch block Function Password Skip Off Recovery BIOS Off Floppy write protect Off SW1 on off X X X X SW2 X X on off X X SW3 X X X X on off SW4 X X X X X X i Switch 4 (SW4) is reserved! Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5. 0 V +12 V -12 V +3. 3 V +5. 0 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % Maximum current Comment 15 A 300 mA 100 mA 4A 50 mA 670 mA Wake on LAN Power loadability Fuse number 1 Maximum Fuse current 750 mA Function Universal serial bus (USB) Port A Keyboard Mouse Universal serial bus (USB) Port B Maximum function current 500 mA Not specified Not specified 500 mA 2 750 mA Installing Drivers Insert the "Drivers & Utilities" CD. When the DeskStart window appears, select SCENIC Pro. [. . . ]