User manual FUJITSU SIEMENS XPERT 8120-6/64

[. . . ] Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. [. . . ] 10 Add-on modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Replacing the processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Upgrading main memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Upgrading the video memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Replacing the lithium battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 A26361-D1064-Z120-10-7419 Introduction i This system board is available in different configuration levels. Depending on the hardware configuration of your device, it may be that you cannot find several options in your version of the system board, even though they are described. You may find further information in the description "BIOS Setup". Further information to drivers is provided in the readme files on hard disk or on the supplied drivers diskettes or on the "Drivers & Utility" or "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! i Pay particular attention to texts marked with this symbol. Failure to observe this warning endangers your life, destroys the system, or may lead to loss of data. Supplementary information, remarks and tips follow this symbol. Texts which follow this symbol describe activities that must be performed in the order shown. The equipment and tools you use must be free of static charges. Pull out the power plug before inserting or pulling out boards containing ESDs. Always hold boards with ESDs by their edges. A26361-D1064-Z120-10-7419 English - 3 Features Features The components and connectors marked do not have to be present on the system board. · · · · · · · · · · · · · · · · · · · · · · · · · · · ATX system board Intel Pentium II processor with MMX technology Processor cache module for Intel 100 MHz slot 1 processor socket Second-level cache in processor cache module 16 to 384 Mbytes main memory (SDRAM memory modules) Error recognition and error correction via ECC Flash BIOS 5 PCI slots (with busmaster capability), 1 ISA/PCI slot (shared) 1 ISA slot AGP slot for AGP graphics controller (AGP = Accelerated Graphics Port) 64 bit AGP screen controller, graphics processor Matrox MGA G100 with Windows accelerator, 3D accelerator and 2 Mbyte SGRAM video memory Video memory upgrade to 4 or 6 Mbyte SGRAM possible (with Jedec 144-pin 125 MHz SGRAM-SO-DIMM memory modules with "Serial Presence Detect") IDE hard disk controller connected to PCI bus for up to four IDE drives (e. g. IDE hard disk drives, ATAPI CD-ROM drives), (ultra DMA33 mode capable), supports PIO modes 0-4 Energy saving functions Floppy disk controller (up to 2. 88 Mbytes format) Supports system boot from a 120 Mbyte IDE floppy disk drive Real-time clock/calendar with integrated battery backup Parallel port (ECP- and EPP-compatible) 2 serial ports (16C550 compatible with FIFO) Monitor connector D-SUB (15-pin) PS/2 mouse port PS/2 keyboard port USB (Universal Serial Bus) Connector for internal infrared connection Prepared for Fujitsu Siemens Computers system monitoring Internal connector for Wake On LAN (WOL) Cover detection 4 - English A26361-D1064-Z120-10-7419 Features Interfaces and connectors 2 4 1 3 5 6 7 1= 2= 3= 4= Serial port 1 Serial port 2 PS/2 keyboard port PS/2 mouse port 5 = Parallel port 6 = USB ports 7 = Video connector The connectors marked do not have to be present on the system board. A26361-D1064-Z120-10-7419 English - 5 Features 1 2 3 4 5 7 9 10 12 8 11 6 13 20 14 15 16 19 17 18 1 = Power supply 1 2 = I2C 3 = Fan 2 4 = Connector for chipcard reader 5 = IrDA 6 = Connector for reset switch 7 = Floppy disk drive 8 = Connector for front panel 9 = Power supply 2 10 = Cover detection 11 = ON/OFF button 12 = SCSI indicator 13 = Fan 1 14 = IDE drives 1 and 2 (primary) 15 = IDE drives 3 and 4 (secondary) 16 = Loudspeakers 17 = Wake On LAN (WOL) 18 = Connector for fax boards 19 = Fan 3 20 = USB chipcard reader The connectors marked do not have to be present on the system board. 6 - English A26361-D1064-Z120-10-7419 Features Possible screen resolution Depending on the operating system used the screen resolutions in the following table refer to the screen controller on the system board. If you are using an external screen controller, you will find details of supported screen resolutions in the Operating Manual or Technical Manual supplied with the controller. To select the appropriate setting for your monitor, please use the Matrox VGA drivers supplied. In Windows 95 you can select your monitor type (you should possibly use the standard type) and the resolution in the Control Panel under Display Properties in the tabs MGA-Monitor and MGA settings after these drivers have been installed. Screen resolution 640x480 640x480 640x480 800x600 800x600 800x600 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1600x1024 1600x1024 1600x1024 1600x1200 1600x1200 1600x1200 Refresh rate (Hz) 120 120 120 120 120 120 120 120 120 110 110 93 100 100 83 90 90 89 83 83 75 Horizontalrate (kHz) 31 to 51 31 to 51 31 to 51 37 to 77 37 to 77 37 to 77 48 to 98 48 to 98 48 to 98 57 to 100 57 to 100 57 to 100 62 to 107 62 to 107 62 to 107 71 to 96 71 to 96 71 to 96 71 to 105 71 to 105 71 to 105 Max. number of colors (2MB) 256 65 K 16, 7 mio. 256 65 K -256 65 K -256 --256 --256 --Max. number of colors (4Mbytes / 8Mbytes) 256 65 K 16, 7 mio. [. . . ] Insert the memory module into the location. At the same time flip the lateral holders upwards until the memory module snaps in place. Removing a memory module Flip the holders to the right and left of the location outwards. Pull the memory module out of its location. A26361-D1064-Z120-10-7419 English - 13 Add-on modules Upgrading the video memory If 2 MB of video memory is installed on the system board, you can increase the video memory to 4 or 6 Mbytes (with Jedec 144-pin 125 MHz SGRAM-SO-DIMM memory modules with "Serial Presence Detect"). 2 3 4 1 3 Insert the memory modules, contacts first, into the slot (1). Carefully push the memory module downwards (2) until you feel it latch into place. Removing memory modules Carefully push the two mounting clips outwards (3). [. . . ]