User manual FUJITSU 435DX

[. . . ] Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. LifeBook, Fujitsu, and the Fujitsu logo are trademarks of Fujitsu Limited. [. . . ] The options available vary from Off, which has no inactivity shutoff, to times from 1 minute to 16 minutes. Auto Suspend Time-out: The auto-suspend time-out parameter is the length of time without any I/O activity before your notebook goes into Suspend Mode. If you choose a factory combination of parameters this field will display that setting. If you choose to customize the parameters you will be able to set this yourself. The options available vary from Off, which has no inactivity suspension, to times from 5 to 60 minutes. Suspend Mode: The Suspend Mode field allows you to choose the form of suspend state you wish. If you choose Suspend, you will suspend operation with power to RAM, and everything else powered down or in a very low power state. If you choose Save-to-Disk Mode your notebook will save all of RAM to the hard disk before going to Suspend Mode and turn off power to the RAM while in the suspended state. POINT When resuming from a Save-to-Disk suspension there will be a delay while the contents of RAM are loaded from the hard disk. Resume On Time: The Resume On Time field sets whether or not to Resume from the Suspend state at a designated time. This feature is available from either the Suspend Mode or the Save-to-Disk Mode. Resume Time: The Resume Time Sets the designated time, on a 24-hour clock, when your notebook is to automatically resume operation from the Suspend state. The format of the clock setting is hours:minutes:seconds. Each segment of the time is set separately, either by incrementing or by typing in the numbers. You move between the segments with the Tab key or the Shift+Tab keys. This field does not appear if Resume On Time is set to O ff. Exiting from the Power Savings Menu When you have finished setting the parameters on the Power Savings Menu, you can either exit from the Setup Utility or move to another menu. If you wish to exit from Setup Utility press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys. 71 CAUTION In the Save-to-Disk Mode there is no indication on the Status Indicator to let you know you are suspended rather than shut off from the Power Switch. You may want to make a practice of always trying the Resume Button before using the Power Switch. Resume On Modem Ring: Resume On Modem Ring sets whether or not to Resume from the Suspend state when a message is received by telephone line. This feature is not available if the Save-to-Disk Mode is enabled. This feature applies to internal, external and PC Card modems. Section Three Table 3-5 Power Savings Default Settings Parameter Video Time-out Hard Disk Time-out Standby Time-out Auto Suspend Time-out Maximum Battery Life 30 sec 30 sec 1 min 5 min Maximum Performance Off Off Off 15 min Custom 2 Minutes 30 Seconds 2 Minutes 5 min None Off Off Off Off 72 LifeB ook 40 0 Series from Fuj itsu C on fi guri ng Your Li feB ook 400 S eries Boot Sequence: The Boot Sequence possible sources are the internal hard drive, external floppy disk drive, and whatever kind of drive is in the Multi-function Bay. The default order is CDROM, floppy disk drive, and then hard drive. This is the order in which the BIOS will search for an operating system unless you change the numbers by using the cursor keys to select item and then press the + or ­ key to change the order. Summary Screen: The Summary Screen Field allows you to enable and disable the display of a screen containing a summary of the configuration of the system. [. . . ] 74 135 Index Expansion Bus Connector . 112 External Floppy Disk Drive Adapter . 2­3, 32­34, 46, 52, 78, 84­86, 106 Floppy Disk Drive Access Indicator . 36, 46, 57, 116 Hard Drive Access Indicator . [. . . ]