User manual FUJITSU 690TX

[. . . ] COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks, and LifeBook is a trademark of Fujitsu Limited. [. . . ] Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 57. ) Table 3-14 shows the names of the menu fields for the Power menu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. POINT Most power management parameters can also be set from the Windows 95 desktop without entering the setup utility, using PowerPanel by Phoenix Technologies. Changing the settings with PowerPanel does not change what is stored in the CMOS memory. (See pages 43-47. ) POWER MENU ­ SETTING POWER MANAGEMENT FEATURE CONTROLS Figure 3-14 Power Menu 98 LifeB ook 60 0 Series from Fuj itsu C onfi gu ri n g Your Li fe Book 600 S er ie s Table 3-14 Fields, Options and Defaults for the Power Menu. x-xx Menu Field Power Savings: Options Customized; Maximum Performance; Maximum Power Savings, Disabled. Default [Customized] Description Sets the power savings parameters to a factory installed combination of parameters, a custom set of parameters set by you or no power saving features. Sets the length of time that the hard drive can be inactive before your notebook automatically turns off the power to the hard drive controller and drive motor. If you choose a factory installed combination of parameters this field will display the setting. If you choose to customize the parameters you will be able to set this yourself. The options available vary from Off, which has no inactivity shutoff, to 20 minutes. Sets the length of time without any user input device activity before the display is turned off. If you choose a factory combination of parameters, this field will display the setting . If you choose to customize the parameters, you will be able to set this yourself. Off has no inactivity shutoff. Turns on and off the slow down of the CPU during periods of inactivity. When this is turned on the CPU clock slows by the amount set in the Advanced submenu when there is no activity for 16 seconds or more. Normal speed resumes automatically as soon as there is any activity. 99 Hard Disk Timeout: [Off] Video Timeout: 2 minutes to 20 minutes; Off. [Off] Idle Mode: On; Off. [On] Section Three Table 3-14 Fields, Options and Defaults for the Power Menu. x-xx Menu Field Standby Timeout: Options 1 minute to 16 minutes; Off. Default [4 Minutes] Description Sets the length of time without any user input device activity before the CPU is set to half speed and the display and the hard drive are turned off. If you choose a factory combination of parameters this field will display the setting . If you choose to customize the parameters you will be able to set this yourself. Sets the length of time without any I/O activity before your not book goes into Suspend mode. [. . . ] 4, 17-19, 21, 41, 50-51, 137, 160-161, 169 Presentation profile . 44, 51-52, 55-56, 139, 158, 173, 175, 178-179 Quiet boot . 3, 125, 133, 156, 158, 168, 173-174, 179-180 Real time clock . 18, 26, 29, 37, 46, 48-49, 54, 56, 93, 115-116, 143-146, 148, 156, 179 Resume . [. . . ]