User manual FUJITSU AOYG12KGCA

[. . . ] Before using this product, read these instructions thoroughly and keep this manual for future reference. To prevent personal injury, or property damage, read this section carefully before you use this product, and be sure to comply with the following safety precautions. Incorrect operation due to failure to follow the instructions may cause harm or damage, the seriousness of which is classified as follows: This mark warns of death or serious injury. This mark denotes an action that is PROHIBITED. [. . . ] Program timer (combined use of the On timer and the Off timer) you can set an integrated OnOff or OffOn timer. Either of the timer whose configured starting time is closer to the current time works first, and the order of the timer operation is displayed as follows: To set the program timer, conduct the same steps 1 to 5 for the On/ Off timer. If you change the setting value for the timer after the Program timer Is set, the counting down of the timer will be reset at that moment. Time setting for each combination should be within a span of 24 hours. To set the Sleep timer, first follow steps 1 to 3 for the On/Off timer. 4 Adjust the time by pressing the "SELECT" button while the "CLOCK" indicator is blinking. Each time you press the button, the time changes as follows: To cancel the Sleep timer, press the "SLEEP" button while the "SLEEP" indicator is on. To help you to fall asleep comfortably and prevent excessive warming or cooling in sleep, the Sleep timer controls the temperature setting Automatically in accordance with the set time shown as follows. The air conditioner completely turns off after the set time has elapsed. 5 hour Set time Set time 1 hour On and Off timer can be combined, and up to 4 reservations (program ) per day and 28 reservations per week. Before setting the program, please set the week and time of the air conditioner first. If the week and time are not set, the weekly timer will not operate correctly at the set time. Come back home Go to sleep To set the Weekly timer, first follow steps 1 to 3 on page 6 for the On/Off timer. 4 Select the program number and the day using the "SELECT" button. Press the "NEXT" button, when the program number and day you want to set are blinking. 5 Press the "SELECT" button to select the operation mode (On timer, Off timer, or No timer operation). Example of Weekly timer 2 You can specify a given temperature in the On setting in Weekly timer. * You can set the temperature for the Auto, Cooling, or Dry mode within the range of 18-30°C, for the Heating mode the range is 10 or 16-30°C. Even if you set to 10, 16, or 17°C, if you run the product on the Auto, Operations modes other than the temperature setting will be the Same at the last time operation was stopped, so Cooling Heating Cooling Heating type of operations cannot be automatically set. If you set the On timer and Off timer on the same time, the air con- ditioner will run the On timer. If two On timer are set at the same time, the air conditioner will run in the order of the program number. If there is a power interruption, such as due to a power outage During the Weekly timer setting or a circuit breaker cutting out, the internal timer of the air conditioner will be incorrect. [. . . ] Various smells generated from interior textile, furniture, or cigarette smoke absorbed into the air conditioner may be emitted. Mist or steam is emitted from In the Cooling or Dry mode, a thin mist generated by condensation formed with sudden cooling pro- During the Heating operation, the fan built-in the outdoor unit may stop and rising steam generated by the Automatic defrosting operation may be seen. Immediately after the Heating operation is started, the fan speed stays very low temporarily to Warm up the internal parts of the unit. In the Heating mode, the outdoor unit stops and the indoor unit operates at very low fan speed if The room temperature rises above the set temperature. [. . . ]