User manual FUJITSU B112

[. . . ] COPYRIGHT © Copyright 1999 Fujitsu PC Corporation. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu PC Corporation. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu PC Corporation. Fujitsu PC Corporation disclaims liability for any inaccuracies, errors, omissions, or future changes. [. . . ] Press the Esc key to abort the password setting process. POINT Boot sector protection must be set to [Normal] to install or upgrade an operating system. Exiting from the Security Menu When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys. CAUTION Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot. CAUTION If the Power Management Security is Enabled and the Password on Boot is Disabled you will not be able to resume operation from the Suspend or Save-to-Disk modes. 82 LifeBook B112 from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k B 1 1 2 POWER MENU ­ SETTING POWER MANAGEMENT FEATURE CONTROLS The Power menu allows you to set and change the power management parameters. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 47. ) Table 4-13 shows the names of the menu fields for the Power menu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. v Main Advanced PhoenixBIOS Setup Utility Security Power Boot Info Exit Item Specific Help Power Savings: Hard Disk Timeout: Video Timeout: Idle Mode: Standby Timeout: Auto Suspend Timeout: Suspend Mode: Auto Save To Disk: Resume On Modem Ring: Resume On Time: Resume Time: Advanced Features [Customized] [Off] [Off] [On] [4 Minutes] [15 Minutes] [Suspend] [Off] [Off] [Off] [00:00:00] POINT Most power management parameters can also be set from the Windows 98 desktop without entering the setup utility, using PowerPanel by Phoenix Technologies. Changing the settings with PowerPanel does not change what is stored in the CMOS memory. (See page 39. ) F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v Select Power Management Mode. Choosing modes changes system power management settings. Maximum Power Savings conserves the greatest amount of system power while Maximum Performance conserves power but allows greatest system performance. To alter these setting, choose Customize. To turn off power management, choose Disabled. F9 Setup Defaults F10 Save and Exit Figure 4-13 Power Menu POINT In Windows 98 Auto-Suspend Timeout, Hard Disk Timeout, and Video TImeout features are available exclusively through the operating system. 83 Four Section Four Table 4-13 Fields, Options and Defaults for the Power Menu. Menu Field Power Savings: Options Disabled; Customized; Maximum Power Savings; Maximum Performance. Default [Customized] Description Sets the power savings parameters to a factory installed combination of parameters, a custom set of parameters set by you or no power saving features. Factory Installed Values for Power Saving Profiles Profile Customized: Maximum Power Savings: Maximum Performance: Disabled: Sample Customized Profile: (To get even better battery life keep the display and volume settings as low as possible by using this custom setting. ) 84 Hard Disk Timeout Off. 1 Minute. Auto Suspend Mode 15 Minute. 5 Minutes. LifeBook B112 from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k B 1 1 2 Table 4-13 Fields, Options and Defaults for the Power Menu. Menu Field Hard Disk Timeout: Options 30 seconds to 20 minutes; Off. Default [Off] Description Sets the length of time that the hard drive can be inactive before your notebook automatically turns off the power to the hard drive controller and drive motor. If you choose a factory installed combination of parameters this field will display the setting. [. . . ] 41-42, 44-46, 79-82, 116, 125 Password on boot . 6, 22, 44, 88, 104, 106-108, 114, 119, 143 PC Card access indicator . 3, 5, 7, 13, 23-26, 67, 143 Port Replicator . 12-13, 44, 46, 81, 112, 130-132, 150 Power adapter . [. . . ]