User manual FUJITSU B2131 Software Guide

[. . . ] Main Advanced Security Power Boot Info Exit Item Specific Help Fujitsu LifeBook B Series BIOS Guide LifeBook Series: Model Numbers: Document Date: B Series B-2175 10/26/2000 This document is designed to provide Fujitsu LifeBook developers and users with an understanding of the system's Basic Input-Output System (BIOS) F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit FUJITSU PC CORPORATION LifeBook B Series BIOS B Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS' environment to operate your notebook. The BIOS Setup Utility configures: · Device control feature parameters, such as changing I/O addresses and boot devices. · System Data Security feature parameters, such as passwords. 4. [. . . ] When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: 15: [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 9. IRQ Reservation Submenu Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu of the Advanced Menu Menu Field IRQ 3: Options · Available · Reserved Default [Available] Description Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table. Reserves IRQ 4. IRQ 4: · Available · Reserved · Available · Reserved · Available · Reserved [Available] IRQ 5: [Available] Reserves IRQ 5. IRQ 7: [Available] Reserves IRQ 7. 17 LifeBook B Series BIOS Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu of the Advanced Menu Menu Field IRQ 9: Options · Available · Reserved · Available · Reserved · Available · Reserved · Available · Reserved Default [Available] Description Reserves IRQ 9. IRQ 10: [Available] Reserves IRQ 10. IRQ 11: [Available] Reserves IRQ 11. IRQ 15: [Available] Reserves IRQ 15. 18 Advanced Menu USB Features Submenu of the Advanced Menu The USB Features submenu configures the USB capabilities of the system. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help USB Features USB Floppy Disk: [Enabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 10. ACPI Features Submenu Table 10: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu Menu Field USB Features: Options · Disabled · Enabled Default [Enabled] Description When enabled, Legacy Floppy Emulation is enabled and USB floppy is available without USB-aware OS. 19 LifeBook B Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging submenu is for setting up the logs for DMI event logging. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Event Logging Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read: Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter] Press <Enter> key to view the contents of the event log. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 11. Event Logging Submenu Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Event Log Capacity: Event Log Validity: View Event Log: Event Logging: · Enter · Disabled · Enabled · Disabled · Enabled · No · Yes · Enter Options Default Space Available Valid [Enter] [Enabled] Description Display only Display only Allows you to view content of event log. Turns event logging on and off for all DMI events. System Boot Event: Clear All Event Logs: [Disabled] Turns event logging on and off for DMI system boot events. [No] When set to [Yes] all event logs will be cleared at next boot. Mark Events as Read: [Enter] Allows you to make all events currently in the event log as read. 20 Secirity Menu SECURITY MENU ­ SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through The Setup Utility to make any changes. The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. POINTS · If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. · If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again, press the Enter key and then retype the password. Press the Esc key to abort the password setting process. · Boot sector protection must be set to [Normal] to install or upgrade an operating system. CAUTIONS · Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot. · If the Password on Resume is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password on Boot is enabled. 21 LifeBook B Series BIOS Main Advanced PhoenixBIOS Setup Utility Security Power Boot Info Exit Item Specific Help Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length Password on boot: Boot from Removable Media: Floppy Disk Access: Hard Disk Security Owner Information Hard Disk Boot Sector: Security Panel on Resume: Clear Clear [Enter] [Enter] [0] [Disabled] [All] [All] Press <Enter> key to set Supervisor password to enable any password features. Then password entry is required to enter BIOS Setup. Table 12: Fields, Options and Defaults for the Security Menu Menu Field Supervisor Password is: User Password is: vv [Normal] [Enabled] F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Figure 12. Security Menu v F9 Setup Defaults F10 Save and Exit Options ­-- Default Clear Description A display-only field. [. . . ] To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the BIOS setup utility. ­-- +Hard Disk Drive · FUJITSU MHM2100AT-(PM) · Bootable Add-in Cards Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. [. . . ]