User manual FUJITSU C2310

[. . . ] Copyright Copyright Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. [. . . ] (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click the [System] icon. The [System Properties] window will be displayed. Confirm the settings of [Full computer name:] and [Workgroup:]. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on the screen. 1. 2. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. A list of currently installed networks will be displayed. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed. Click the [General] tab if it is not already selected. Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 6. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection: Assign the name of the work group to be accessed. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. [. . . ] USB 2. 0 is backward-compatible with USB 1. 0 devices to allow you to connect older devices to the ports. A video display standard originally introduced by IBM with the PS/2 series of personal computers. A memory dedicated to video display data and control. WEP Wired Equivalent Privacy WEP is an encryption algorithm that is part of the 802. 1x standard. [. . . ]