User manual FUJITSU C2330

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. [. . . ] For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. 8. Processing will return to the [Wireless Network Connection Properties] window. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. 2. Click the [Start] button, then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click the [System] icon. The [System Properties] window will be displayed. Confirm the settings of [Full computer name:] and [Workgroup:]. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on the screen. 1. 2. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. A list of currently installed networks will be displayed. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed. Click the [General] tab if it is not already selected. 3. [. . . ] A memory dedicated to video display data and control. WEP Wired Equivalent Privacy WEP is an encryption algorithm that is part of the 802. 1x standard. WEP works by encrypting data while being transmitted over radio waves. Wi-Fi Compatible Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by the WECA (Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of wireless IEEE 802. 11 LAN products. [. . . ]