User manual FUJITSU C350

[. . . ] COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. [. . . ] The default is all users with a password. When set to Enabled, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is required. When set to Enabled, a password, is required upon Resume from Suspend or Save-to-Disk Mode. This password is identical to power of password. Sets write protection for the sector of the boot disk which contains the operating system. When set to Write Protect, the BIOS will prevent any application from writing into the sector of the internal hard drive containing the operating system. When set to Normal there is no BIOS protection of the operating system. POINT Boot sector protection must be set to [Normal] to install or upgrade an operating system. Password on boot: Enabled; Disabled. Disabled. Power Management Security: Enabled; Disabled. Disabled. Fixed disk boot sector: Normal; Write Protect. [Normal] Exiting from the Security Menu When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys. 74 LifeBook C Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k C S e r i e s POWER MENU ­ SETTING POWER MANAGEMENT FEATURE CONTROLS The Power menu allows you to set and change the power management parameters. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 51. ) Table 4-9 shows the names of the menu fields for the Power menu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. POINT Most power management parameters which are BIOS related can be set from PMSet 98 and the Power Management control panel. Changing PMSet's own options and settings does not change what is stored in the CMOS memory. v Main Advanced PhoenixBIOS Setup Utility Security Power Boot Info Exit Item Specific Help Power Savings: Hard Disk Timeout: Video Timeout: Idle Mode: Standby Timeout: Auto Suspend Timeout: Suspend Mode: Auto Save To Disk: Resume On Modem Ring: Resume On Time: Resume Time: Advanced Features [Customized] [Off] [Off] [On] [4 Minutes] [15 Minutes] [Suspend] [Off] [Off] [Off] [00:00:00] Select Power Management Mode. Choosing modes changes system power management settings. Maximum Power Savings conserves the greatest amount of system power while Maximum Performance conserves power but allows greatest system performance. To alter these setting, choose Customize. To turn off power management, choose Disable. F9 Setup Defaults F10 Save and Exit F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v Figure 4-9 Power Menu 75 Four Section Four Table 4-9 Fields, Options and Defaults for the Power Menu. Menu Field Power Savings: Options Customized; Maximum Power Savings; Maximum Performance, Disabled. [. . . ] On your Computer this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Stroke (keyboard) The amount of travel of a key when it is pressed from resting to fully depressed. Suspend To make inoperative for a period of time. [. . . ]