User manual FUJITSU C360

[. . . ] COPYRIGHT Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. [. . . ] Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 51. ) Table 4-10 shows the names of the menu fields for the PCI Configuration submenu, all the options for each field and a description of the field's function and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help PCI Configuration v IRQ Reservation Reserve specific IRQs for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-10 PCI Configuration Submenu 74 LifeBook C Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k C S e r i e s Table 4-10 Fields, Options and Defaults for the PCI Configuration Submenu Menu Field Options Default IRQ Reservation: Selects the IRQ Reservation Submenu. -- Description This menu allows you to set aside interrupt levels for legacy ISA devices. Exiting from the Advanced Menu When you have finished setting the parameters on the Advanced Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 75 Four Section Four IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 51. ) Table 4-11 shows the names of the menu fields for the IRQ Reservation submenu of the PCI Configuration submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-11 IRQ Reservation Submenu 76 LifeBook C Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k C S e r i e s Table 4-11 Fields, Options and Defaults for the IRQ Reservation Submenu of the of the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ 3: Options Available; Reserved. Default [Available] Description Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table. Reserves IRQ 11. Four IRQ 4: IRQ 5: IRQ 7: IRQ 9: IRQ 10: IRQ 11: Available; Reserved. Available; Reserved. [Available] [Available] [Available] [Available] [Available] [Available] CAUTION Only IRQ's 9, 10, & 11 can be reserved without conflict. 77 Section Four DMI Event Logging Submenu of the Advanced Menu The DMI Event Logging Submenu is for setting up the logs DMI event logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See page 51. ) Table 4-12 shows the names of the menu fields for the DMI Event Logging submenu, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help DMI Event Logging Event log capacity: Event log validity: Space Available Valid Clear all DMI event logs: [No] Event Logging: System Boot Event: [Enabled] [Disabled] 'Yes' clears all DMI event logs at next boot. The value is reset to 'No' after clearing logs. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 4-12 DMI Event Logging Submenu 78 LifeBook C Series from Fujitsu C o n f i g u r i n g Yo u r L i f e B o o k C S e r i e s Table 4-12 Fields, options and Defaults for the DMI Event Logging Submenu Menu Field Event log capacity: Event log validity: Clear all DMI event logs: Options Display only. Default [Space Available] [Valid] [No] A Yes selection causes the event logs to clear at the next boot. Once the logs are cleared this automatically sets to No until reset to yes by selecting yes here. Turns event logging on and off for all DMI events. Turns event logging on and off for DMI system boot events. Four 79 Description Event Logging: System Boot Event: Enabled; Disabled. Enabled; Disabled. [Enabled] [Disabled] Section Four SECURITY MENU ­ SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. [. . . ] A reset erases all information stored in RAM. Restart See Reset. 158 LifeBook C Series from Fujitsu Appendices Resume To proceed after interruption. In your Computer this refers to returning to active operation after having been in one of the suspension states. A form of memory in which information is stored by physically altering the material. [. . . ]