User manual FUJITSU C7651 Software Guide

[. . . ] C Series BIOS C Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS' environment to operate your notebook. The BIOS Setup Utility configures: s 4. To activate a submenu press the [Enter] key. [. . . ] Bi-directional allows two-way transfer of information between your notebook and a connected parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices. Allows user to set the parallel port base I/O address when the parallel port is Enabled. DMA 1 DMA 3 Disabled Enabled Auto Output Only Bi-directional ECP Parallel Port: s s s [Enabled] Mode: s s s [Bi-directional] I/O address: s s s 378 - 37F 278 - 27F 3BC - 3BF IRQ 5 IRQ 7 [378 - 37F] Interrupt: s s [IRQ 7] Allows user to set the parallel port interrupt when the parallel port is Enabled. 13 LifeBook C Series BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Keyboard/Mouse Features Numlock: [Auto] Hot Plug: [Enabled] Internal Pointing Device: [Auto Disabled] Infared Mouse: [Disabled] Selects power-on state for Numlock. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 6 Keyboard/Mouse Features Submenu Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Numlock: Options s s s Default [Auto] Description Sets the NumLock function state when the computer completes booting. Auto Off On Enabled Disabled Auto Disabled Always Enabled Hot Plug: s s [Enabled] Enables and disables the ability to plug a mouse or keyboard into the PS/2 port and have it immediately recognized and active. Sets the device controlling the mouse cursor on the screen. Always Enabled makes the pointing device always enabled whether there is an external mouse or not. Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS/2 port. If IR Mouse is enabled, the PS/2 mouse is disabled. If you want to use the internal pointing device with the IR Mouse, you must select Always Enabled in the Internal Pointing Device. Internal Pointing Device: s s [Auto Disabled] Infrared Mouse: s s Disabled Enabled [Disabled] 14 Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Main Advanced Video Features Display Compensation: [Internal Flat Panel] [Disabled] Select display terminal. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Figure 7 Video Features Submenu v F9 Setup Defaults F10 Save and Exit Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Display: Options s Default [Internal Flat Panel] Description Selects where the video signal will be routed. s s Internal Flat Panel External Simultaneous Enabled Disabled Compensation: s s [Disabled] Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolution 1024 x 768 or 800 x 600 will still cover the entire screen. 15 LifeBook C Series BIOS Internal Device Configuration Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Internal Device Configurations Floppy Disk Controller: [Enabled] IDE Controller: [Both] [Disabled] Floppy disk drive is disabled. [Enabled] Floppy disk drive is enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 8 Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Floppy Disk Controller: IDE Controller: Options s s Default [Enabled] Description Enables or disables the Floppy Disk Drive. Disabled Enabled Both Disabled Primary Secondary s s s s [Both] Enables or disables selected IDE devices. 16 Advanced Menu PCI Configuration Submenu of the Advanced Menu The PCI Configuration submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. POINT The BIOS setting for your communication device is variable depending on your LifeBook C Series Built-to-order configuration. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help PCI Configuration v IRQ Reservation Reserve specific IRQs for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 9 PCI Configuration Submenu Table 9: Fields, Options and Defaults for the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ Reservation Options ­-- Default ­-- Description Reserve specific IRQs for use by legacy ISA devices. 17 LifeBook C Series BIOS IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. CAUTION Only IRQ's 9, 10, & 11 can be reserved without conflict. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 10 IRQ Reservation Submenu Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ 3: Options s s Default [Available] Description Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table. Reserves IRQ 4. Available Reserved IRQ 4: s s Available Reserved Available Reserved Available Reserved [Available] IRQ 5: s s [Available] Reserves IRQ 5. IRQ 7: s s [Available] Reserves IRQ 7. 18 Advanced Menu Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ 9: Options s s Default [Available] Description Reserves IRQ 9. Available Reserved Available Reserved Available Reserved IRQ 10: s s [Available] Reserves IRQ 10. IRQ 11: s s [Available] Reserves IRQ 11. 19 LifeBook C Series BIOS CPU Features Submenu of the Advanced Menu The CPU Features Submenu configures the system processor. *Note that this submenu only appears in certain configurations, based upon the system CPU. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit CPU Features Item Specific Help Processor Serial Number:[Disabled] Intel(R) SpeedStep(R) Technology: [Auto] Configures Processor Serial Number feature of Pentium(R) III processor. [Disabled] Processor Serial Number feature is disabled. [Enabled] Processor Serial Number feature is enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 11 CPU Features Submenu Menu Field Processor Serial Number Intel(R) SpeedStep(TM) Technology Options s s Default [Disabled] Description Configures Processor Serial Number feature of Pentium(R) III processor. When Auto is selected, the CPU speed is changed based upon a power source change. is selected, the CPU speed is maximized. [. . . ] ­-- ­-- +Hard Disk Drive ATAPI CD-ROM Drive ­-- ­-- ­-- ­-- Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 34 © Info Menu INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screens that provides the configuration information for your notebook. The following table shows the names of the menu fields for the Info menu and the information displayed in those fields. [. . . ]