User manual FUJITSU E6550

[. . . ] Copyright Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. [. . . ] Place the CD into the tray, label side up, with the hole in the center of the CD. Snap the CD onto the raised circle in the center of the tray. Gently push the holder tray back in until you hear a click. (Figure 4-5) POINT If you have disabled the Auto Insert Function, you will have to start the CD from your desktop, as your LifeBook will not automatically recognize that a CD has been loaded. LOADING A CD To load a CD into your CD-ROM drive, follow these easy steps: 1. Push and release the eject button on the front of the CD-ROM drive to open the holder tray. The tray will come out of the LifeBook a short distance. Gently pull the tray out until a CD can easily be placed in the tray. CAUTION There may be a protective sheet in the tray when it was shipped, please make sure it is removed before operating. (c) (d) Figure 4-5 Loading/Ejecting a CD (a) (b) 55 LifeBook E Series ­ Section Four REMOVING A CD 1. Push and release the eject button on the front of the CD-ROM drive. This will stop the CD and the holder tray will come out of the LifeBook a short distance. Gently pull the tray out until the CD can easily be removed from the tray. Carefully remove the CD from the holder tray. Gently push the holder tray back in until you hear a click. 3. This will open the System Properties dialog box. Select the Device Manager tab to display the device lists for your LifeBook. Click on the + to the left of the CD-ROM drive icon. The treeview will expand to show the CD-ROM drive manufacturer's name and model number. Double-click on the CD-ROM drive manufacturer's name and model number. This will open the CD-ROM drive manufacturer's name and model number dialog box. Select the Settings tab and then remove the check mark in the Auto Insert Notification box to turn it off. Click Close in the System Properties dialog box, then click Yes in the System Settings Change pop-up window when it asks you to restart your machine and activate this change. The Auto Insert function can be re-activated by repeating this process and placing a check mark in the Auto Insert Notification box to turn it back on. AUTO INSERT FUNCTION (ONLY IN MODELS WITH WINDOWS 98 SECOND EDITION) The Auto Insert function allows your LifeBook to automatically start a CD as soon as it is inserted in the CDROM drive and the tray is closed. [. . . ] On your LifeBook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Stroke (keyboard) The amount of travel of a key when it is pressed from resting to fully depressed. Suspend To make inoperative for a period of time. [. . . ]