User manual FUJITSU E6634 Software Guide

[. . . ] Fujitsu LifeBook E Series BIOS Guide LifeBook E Series Models: E-6664 E-6644 E-6634 E-6624 Document Date: 10/29/01 Document Part Number: FPC58-0629-01 F U J I T S U P C C O R P O R AT I O N 1 LifeBook E Series BIOS E Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures: s 6. To go to the Exit menu from any other menu, press the [Esc] key. [. . . ] Auto uses external video on Docking stations if present. Internal always uses the internal video adapter. Primary Video Adapter: s s [Auto] 15 LifeBook E Series BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Internal Device Configurations Floppy Disk Controller: IDE Controller: Modem Controller: LAN Controller: [Enabled] [Both] [Enabled] [Enabled] [Disabled] Floppy disk drive is disabled. [Enabled] Floppy disk drive is enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 8. Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Floppy Disk Controller: IDE Controller: Options s s Default [Enabled] Description Enables or disables the Floppy Disk Drive. Disabled Enabled Disabled Primary Secondary Both Disabled Enabled Disabled Enabled s s s s [Both] Enables or disables selected IDE devices. Modem Controller s s [Enabled] Enables or disables Modem controller. LAN Controller s s [Enabled] Enable or disables the LAN controller. 16 Advanced Menu PCI Configuration Submenu of the Advanced Menu The PCI Configuration submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. POINT The BIOS setting for your communication device is variable depending on your LifeBook E Series Built-to-order configuration. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help PCI Configurations F1 Help ESC Exit Table 9: Fields, Options and Defaults for the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ Reservation v IRQ Reservation Reserve specific IRQs for use by legacy ISA devices. Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 9. PCI Configuration Submenu Options ­-- Default ­-- Description Reserve specific IRQs for use by legacy ISA devices. 17 LifeBook E Series BIOS IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration submenu allows the user to mark IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. CAUTION Only IRQ's 9, 10, & 11 can be reserved without conflict. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 10. IRQ Reservation Submenu Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configuration Submenu Menu Field IRQ 3: Options s s Default [Available] Description Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from IRQ bitmap in the PCI IRQ routing table. Reserves IRQ 4. Available Reserved Available Reserved Available Reserved Available Reserved Available Reserved Available Reserved Available Reserved IRQ 4: s s [Available] IRQ 5: s s [Available] Reserves IRQ 5. IRQ 7: s s [Available] Reserves IRQ 7. IRQ 9: s s [Available] Reserves IRQ 9. IRQ 10: s s [Available] Reserves IRQ 10. IRQ 11: s s [Available] Reserves IRQ 11. 18 Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu provides options for configuring the CPU. PhoenixBIOS Setup Utility Security Power Savings Exit CPU Features Item Specific Help Main Advanced SpeedStep(TM) Technology: [Enabled] On Battery: [Battery Optimized] On AC: [Maximum Performance] Select Enhanced Intel(TM) SpeedStep(TM) Technology enabled or disabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 11. CPU Features Submenu Table 11: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field SpeedStep(TM) Technology: On Battery: Options s s Default [Enabled] Description Enables or disables the SpeedStep(TM) Technology features. When disabled, On Battery and On AC are disabled. When Automatic is selected, the CPU speed changes based upon the power source change. When Maximum Performance is selected, the CPU speed is maximized. When Battery Optimized is selected, the CPU speed is optimized for battery operation. When Automatic is selected, the CPU speed changes based upon the power source change. When Maximum Performance is selected, the CPU speed is maximized. When Battery Optimized is selected, the CPU speed is optimized for battery operation. Disabled Enabled Maximum Performance Battery Optimized Automatic Maximum Performance Battery Optimized Automatic s [Battery Optimized] s s On AC: s [Maximum Performance] s s 19 LifeBook E Series BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu provides options for enabling or disabling the USB Floppy Disk Drive. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit USB Features Item Specific Help USB Floppy Disk: [Disabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 12. USB Features Submenu Table 12: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field USB Floppy Disk: Options s s Default [Disabled] Description Enables or disables Legacy Floppy Emulation. [. . . ] ­-- +Hard Disk Drive s s HITACHI_DK23CA-30-(PM) Bootable Add-in Cards ATAPI CD-ROM Drive ­-- ­-- Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility 30 or move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to move to another menu, use the cursor keys. © Info Menu INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screens that provides the configuration information for your notebook. The following table shows the names of the menu fields for the Info menu and the information displayed in those fields. [. . . ]