User manual FUJITSU LIFEBOOK A6120

[. . . ] The following procedures allow you to navigate the setup utility menus: Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. ], [ ] 1. To select a menu, use the cursor keys: [ 2. To select a field within a menu or a submenu, use the cursor keys: [ ], [ ]. [. . . ] Note that this setting is overridden after Windows starts up. Internal Flat Panel External Autos 13 LifeBook A Series BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN and Wireless LAN Controllers. Info System Phoenix TrustedCore(tm) Setup Utility Advanced Security Boot Exit Item Specific Help [Disabled] Serial ATA port is disabled. [Enabled] Serial ATA port is enabled. Internal Device Configurations Serial ATA Controller: AHCI Configuration: Intel(R) Turbo Memory: IDE Controller: Bluetooth(R): LAN Controller: Wireless LAN: [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 8. Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Serial ATA Controller: Options Default [Enabled] Description Enables or disables the Serial ATA port. Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled AHCI Configuration: [Enabled] Enables or disables the selected Advanced Host Controller Interface (AHCI). When Turbo Mmeory is installed, this enables or disables it. Intel(R) Turbo Memory: [Enabled] IDE Controller: [Enabled] Enables or disables selected IDE devices. Bluetooth(R): [Enabled] Enables or disables the Bluetooth controller. LAN Controller: [Enabled] Enables or disables the LAN controller. Wireless LAN: [Enabled] Enables or disables the Wireless LAN controller. 14 Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features submenu provides options for configuring the Intel Core Multi-Processing and SpeedStep power management features of the CPU. Phoenix TrustedCore(tm) Setup Utility Advanced Security Boot Exit CPU Features Item Specific Help Info System Core Multi-Processing: SpeedStep(R) Technology: On Battery: On AC: [Enabled] [Enabled] [Battery Optimized] [Maximum Performance] Select Core Multi-Processing enabled or disabled. XD Bit functionality: [Enabled] Virtualization Technology: [Disabled] F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 9. CPU Features Submenu Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Core Multi-Processing: SpeedStep(R) Technology: On Battery: Options Default [Enabled] Description Enables or disables the Intel Core Multi-Processing features. Enabled Disabled Disabled Enabled Maximum Performance Battery Optimized Automatic Maximum Performance Battery Optimized Automatic Enabled Disabled Disabled Enabled [Enabled] Enables or disables the SpeedStep(R) Technology features. When disabled, On Battery and On AC are disabled. When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. When Automatic is selected, the CPU speed is determined by the power source used. When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. If you make an error when re-entering the password a Warning will display on the screen. To try again press [Enter], then retype the password. Press [Esc] to abort the password setting process. If Security Panel on Resume is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled. Info System Phoenix TrustedCore(tm) Setup Utility Advanced Security Boot Exit Item Specific Help Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Figure 13. Security Menu F9 Setup Defaults F10 Save and Exit 19 LifeBook A Series BIOS Table 13: Fields, Options and Defaults for the Security Menu Menu Field Supervisor Password is: User Password is: Options ­-- Default Clear Description A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not. Set is displayed when the general user password is set, and Clear when it is not. Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). [. . . ] Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to save your changed order when you exit the BIOS setup utility. NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten, depending upon your operating environment. Exiting from Boot Menu When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. [. . . ]