User manual FUJITSU S4572 Software Guide

[. . . ] Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model: S-4572 FUJITSU PC CORPORATION FPC58-0547-01 LifeBook S Series BIOS S Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures: s 4. To activate a submenu press the [Enter] key. [. . . ] Manual Setting allows the device to be enabled or disabled using a Hot Key. Internal Pointing Device: s s s s [Auto Disabled] 14 Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Video Features Display Compensation: [Internal Flat Panel] [Disabled] Select display terminal. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 7. Video Features Submenu Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Display: Options s Default [Internal Flat Panel] Description Selects where the video signal will be routed. s s Internal Flat Panel External Simultaneous Disabled Enabled Compensation: s s [Disabled] Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolution 800 x 600 will still cover the entire screen. 15 LifeBook S Series BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Internal Device Configurations Floppy Disk Contoller: [Disabled] IDE Controller: [Enabled] LAN Controller: [Auto] [Disabled] Floppy disk drive is disabled. [Enabled] Floppy disk drive is enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 8. Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Floppy Disk Controller: IDE Controller: Options s s Default [Disabled] Description Enables or disables the Floppy Disk Drive. Disabled Enabled Disabled Enabled Disabled Enabled Auto s s [Enabled] Enables or disables selected IDE devices. LAN Controller: s s s [Auto] Enables or disables the LAN device. 16 Advanced Menu PCI Configuration Submenu of the Advanced Menu The PCI Configuration submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help PCI Configuration v IRQ Reservation Reserve specific IRQs for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 9. PCI Configuration Submenu Table 9: Fields, Options and Defaults for the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ Reservation Options ­-- Default ­-- Description Reserve specific IRQs for use by legacy ISA devices. 17 LifeBook S Series BIOS IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices. CAUTION Only IRQ's 9, 10, & 11 can be reserved without conflict. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help IRQ Reservation IRQ IRQ IRQ IRQ IRQ IRQ IRQ IRQ 3: 4: 5: 7: 9: 10: 11: 15: [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 10. IRQ Reservation Submenu Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ 3: Options s s Default [Available] Description Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table. Reserves IRQ 4. Available Reserved IRQ 4: s s Available Reserved Available Reserved Available Reserved [Available] IRQ 5: s s [Available] Reserves IRQ 5. IRQ 7: s s [Available] Reserves IRQ 7. 18 Advanced Menu Table 10: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configuration Submenu of the Advanced Menu Menu Field IRQ 9: Options s s Default [Available] Description Reserves IRQ 9. Available Reserved Available Reserved Available Reserved Available Reserved IRQ 10: s s [Available] Reserves IRQ 10. IRQ 11: s s [Available] Reserves IRQ 11. IRQ 15: s s [Available] Reserves IRQ 15. 19 LifeBook S Series BIOS CPU Features Submenu of the Advanced Menu The CPU Features Submenu configures the system Processor. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit CPU Features Item Specific Help Processor Serial Number: [Disabled] Intel(R) SpeedStep(TM) Technology: [Auto] Configures Processor Serial Number feature of Pentium(R) III processor. [Disabled] Processor Serial Number feature is disabled. [Enabled] Processor Serial Number feature is enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 11. CPU Features Submenu Menu Field Processor Serial Number Intel(R) SpeedStep(TM) Technology Options s s Default [Disabled] Description Configures Processor Serial Number feature. Enabled Disabled Auto Max. Disabled s s s s [Auto] When Auto is selected, the CPU speed changes based upon the power source change. is selected, the CPU speed is maximized. is selected, the CPU speed is optimized for battery operation. When Disabled is selected, the CPU speed is fixed to the battery optimized speed. 20 Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help USB Features USB Floppy Disk: [Enabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 12. USB Features Submenu Table 12: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu Menu Field USB Floppy Disk: Options s s Default [Enabled] Description When Disabled is selected, legacy floppy emulation is disabled. When Enabled is selected, legacy floppy emulation is enabled and USB floppy is available without USB-aware OS. Disabled Enabled 21 LifeBook S Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Event Logging Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read: Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter] Press <Enter> key to view the contents of the event log. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 13. [. . . ] Be sure to save your changed order when you exit the BIOS setup utility. ­-- ­-- +Hard Disk Drive ATAPI CD-ROM Drive ­-- ­-- ­-- ­-- Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to move to another menu, use the cursor keys. 34 © Info Menu INFO MENU ­ DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screens that provides the configuration information for your notebook. [. . . ]