User manual FUJITSU S7010D

[. . . ] S Series. book Page 1 Thursday, February 19, 2004 4:52 PM Copyright Copyright Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. The following are registered trademarks of IBM Corporation: IBM, IBM PC AT, IBM PS/2. [. . . ] Something is pushing on the Closed Cover switch. Your system display won't turn on when the system is turned on or when the system has resumed. The system may be passwordprotected. A foreign object, such as a paper clip, is stuck between the display and the keyboard. 62 S Series. book Page 63 Thursday, February 19, 2004 4:52 PM Troubleshooting Problem Possible Cause Possible Solutions The Built-in Display has bright or dark spots. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. This is normal; do nothing. Display is faulty; contact your support representative. The application display uses only a portion of your screen and is surrounded by a dark frame. You are running an application that does not support 800 x 600/1024 x 768 pixel resolution display and display compression is enabled. Display compression gives a clearer but smaller display for applications that do not support 800 x 600/1024 x 768 pixel resolution. You can fill the screen but have less resolution by changing your display compression setting, (See the Video Features submenu, located within the Advanced menu of the BIOS. (See BIOS Setup Utility on page 29 for more information) Press [Fn] + [F7] to increase brightness or doubleclick on the battery gauge and adjust Power Control under battery settings. Try toggling the video destination by pressing [Fn] and [F10] together, or check your BIOS setup and enable your external monitor. (See the Video Features submenu, located within the Advanced Menu of the BIOS. (See BIOS Setup Utility on page 29 for more information) Reinstall your device. (See External Monitor Port on page 52 for more information) Check your device and operating system documentation and activate the proper driver. The Display is dark when on battery power. You have connected an external monitor and it does not display any information. The Power Management utility default is set on low brightness to conserve power. Your BIOS setup is not set to enable your external monitor. Your external monitor is not properly installed. Your operating system software is not setup with the correct software driver for that device. You have connected an external monitor and it does not come on. Miscellaneous Problems An error message is displayed on the screen during the operation of an application. Application software often has its own set of error message displays. Your external monitor is not compatible with your LifeBook notebook. See your monitor documentation and the External Monitor Support portions of the Specifications section. (See Specifications on page 77 for more information) See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 63 S Series. book Page 64 Thursday, February 19, 2004 4:52 PM LifeBook S7000 Notebook POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes success-fully tested by the Power On Self Test. [. . . ] To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select Bluetooth, then select User's Guide. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www. bluetooth. com. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. [. . . ]