User manual FUJITSU SCANSNAP S1300

[. . . ] P3PC-2722-03ENZ0 Operator's Guide Introduction Thank you for purchasing the color image scanner ScanSnap S1300 (hereinafter referred to as "the ScanSnap"). This manual explains how to handle and operate the ScanSnap. Be sure to read this manual and "Getting Started" thoroughly before using the ScanSnap to ensure correct use. We hope that this manual will provide you with useful information in order to utilize the ScanSnap. [. . . ] Blank pages are not deleted when CardMinder is used. For details about the Right-Click Menu, refer to "Right-Click Menu" (page 58). Click the [Option] button in the [Scanning] tab. The [Scanning mode option] dialog box appears. Click the [OK] button to close all open dialog boxes. For details about how to load documents, refer to "How to Load Documents" (page 30). Press the [Scan] button on the ScanSnap to start a scan. Scanned image is saved without any blank pages. 207 Using the ScanSnap in Various Ways (for Windows Users) ■ Correcting Skewed Character Strings When documents with skewed character strings are scanned, the ScanSnap is able to detect the skewed character strings and correct them. To correct skewed character strings, change the settings in the following procedure. up to +/-5 degrees of skew can be corrected. Since this option is performed assuming that the document contains a certain amount of text, character strings may be adjusted at a wrong angle when scanning the following types of documents. In that case, clear the [Correct skewed character strings automatically] check box: - Documents on which pitches between lines or characters are extremely narrow, or characters are overlapped - Documents with many outlined or decorated characters - Documents with many photographs or figures and few characters - Documents with characters on a patterned background e. Characters overlapping illustrations and diagrams - Documents with characters printed in various directions such as drawings - Documents with long diagonal lines - Documents including handwritten characters. You do not have to enable [Correct skewed character strings automatically] when [Automatic detection] is specified for [Paper size] in the [Paper] tab of the ScanSnap setup dialog box because the skewed image is always corrected when documents are scanned by this setting. For details about the Right-Click Menu, refer to "Right-Click Menu" (page 58). Click the [Option] button in the [Scanning] tab. The [Scanning mode option] dialog box appears. 208 Using the ScanSnap in Various Ways (for Windows Users) 3. Select the [Correct skewed character strings automatically] check box. Click the [OK] button to close all open dialog boxes. For details about how to load documents, refer to "How to Load Documents" (page 30). [. . . ] Turn on the computer and log in as a user with Administrator privileges. Exit Cardiris if it is running (select [Cardiris for ScanSnap] → [Quit Cardiris for ScanSnap] from the menu bar). From Finder, select [Applications] → [Cardiris for ScanSnap], and drag the [Cardiris for ScanSnap] folder into the Trash. The [Cardiris for ScanSnap] folder is deleted. [. . . ]