User manual FUJITSU SCANSNAP S1300I

[. . . ] P3PC-3662-01ENZ0 Operator's Guide Introduction Thank you for purchasing the color image scanner ScanSnap S1300i (hereinafter referred to as "the ScanSnap"). This manual explains how to handle and operate the ScanSnap. Be sure to read this manual and "Getting Started" thoroughly before using the ScanSnap to ensure correct use. We hope that this manual will provide you with useful information in order to utilize the ScanSnap. [. . . ] However, high compression is applied to photographs and figures since they are regarded as backgrounds, resulting in deteriorated image data. For this reason, this mode is not appropriate for scanning photographs, images and such. 1. Select [Scan Button Settings] from the Right-Click Menu. For details about the Right-Click Menu, refer to "Right-Click Menu" (page 71). The ScanSnap setup dialog box appears. 2. In the [Color mode] drop-down list in the [Scanning] tab, select [Color high compression]. 3. Click the [OK] button to close the ScanSnap setup dialog box. 243 Using the ScanSnap in Various Ways (for Windows Users) 4. Load a document in the ScanSnap. For details about how to load documents, refer to "How to Load Documents" (page 33). 5. Press the [Scan] button on the ScanSnap to start a scan. The scanned document is saved as highly compressed color image data. 244 Using the ScanSnap in Various Ways (for Windows Users) ■ Deleting Blank Pages from the Scanned Image The ScanSnap can detect and automatically delete blank pages from a scanned image. For example, when you scan a mixed batch of double-sided and single-sided documents in duplex mode, the images are generated without the back sides of the single-sided documents (blank pages). To delete blank pages, perform the following steps to change the setting. ATTENTION The following documents may be detected as blank. - Almost blank documents with only a few characters - Documents of only one color (including black) and without any patterns, lines or characters When you scan such documents, clear the [Allow automatic blank page removal] check box. Also make sure to check the image data for accidentally deleted pages when discarding the scanned document. Blank pages are not deleted when CardMinder is used. 1. Select [Scan Button Settings] from the Right-Click Menu. For details about the Right-Click Menu, refer to "Right-Click Menu" (page 71). The ScanSnap setup dialog box appears. 2. Click the [Option] button in the [Scanning] tab. The [Scanning mode option] dialog box appears. 245 Using the ScanSnap in Various Ways (for Windows Users) 3. Select the [Allow automatic blank page removal] check box. 4. Click the [OK] button to close all open dialog boxes. Load a document in the ScanSnap. For details about how to load documents, refer to "How to Load Documents" (page 33). 6. Press the [Scan] button on the ScanSnap to start a scan. Scanned image is saved without any blank pages. 246 Using the ScanSnap in Various Ways (for Windows Users) ■ Correcting Skewed Character Strings When documents with skewed character strings are scanned, the ScanSnap is able to detect the skewed character strings and correct them. To correct skewed character strings, change the settings in the following procedure. ATTENTION Up to +/-5 degrees of skew can be corrected. Since this option is performed assuming that the document contains a certain amount of text, character strings may be adjusted at a wrong angle when scanning the following types of documents. [. . . ] 39 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 70 Mac OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58, 272 ScanSnap Manager Menu . . . . . . . . . . . . . . . . . . . 273 ScanSnap Organizer . . . . . . . . . . . . . . . . . . . . . . . [. . . ]