User manual FUJITSU STYLISTIC LT LT

[. . . ] FMW43PR1 Mini-Dock User's Guide Stylistic LT Series This mini-dock is designed to extend the connectivity of your pen tablet by providing a number of ports that are not available on the system. Refer to Figures 1, 2, and 3 for port locations. [. . . ] · LAN Port Used for connecting the pen tablet's optional internal LAN module to a LAN hub. Note: The mini-dock is required in order to use the internal LAN module; there is no LAN port on the pen tablet. · USB Port Used for connecting Universal Serial Bus-compliant devices. Floppy Disk Drive FMWFD2 Pen Tablet Mini-Dock PC Card USB Device Video Monitor PS/2-Style Keyboard PS/2-Style Mouse Printer Figure 1. Mini-Dock peripheral Interfaces Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation 8/00 Page 1 of 2 58-0737-00B The viewing angle of the mini-dock can be adjusted to four different positions. The bottom of the support bail on the rear of the support platform (see Figure 3). When storing the mini-dock, flip the bail up against the back of the support platform to allow the platform to lie flat. Installing the System into the Mini-Dock Cautions · Dropping conductive material onto the charging contacts could result in internal damage to the pen tablet circuitry. · Prior to installing your pen tablet into the mini-dock, be sure to power down your system first. Failure to do so could result in damage to the system or the mini-dock. 0 AC Adapter Port 1. Shut down the system by selecting Start> Shut Down> Shut Down. Position the pen tablet against the positioning guide and the back of the mini-dock. Slide the pen tablet into the tray at the bottom of the mini-dock and press it down firmly until it is seated, as shown in Figure 4. [. . . ] Restart your system. Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation 8/00 Page 2 of 2 58-0737-00B [. . . ]