User manual FUNAI 13TR

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. Laser Safety This unit employs a laser. [. . . ] If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording speed will automatically be set to "High" whenever the conditions are met. (See page 41. ) If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording speed of the title. If the title is recorded in other brand's DVD recorder, the title will be dubbed in normal speed with the recording speed that you set with [REC SPEED]. If there is not enough space left on the disc for high/normal speed dubbing with the title's recording speed, the title will be dubbed in normal speed with "Auto" mode. If there is not enough space left on the disc for normal speed dubbing with SLP mode, the title will be dubbed in normal speed with SLP mode until the space of the disc runs out. If you press [DUBBING HDD M DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list. 42 EN One Touch Dubbing from VCR to DVD Selected Title Dubbing Video VR Introduction HDD DVD-RW DVD-RW DVD-R VCR If you want to record a title in the videotape, press [VCR] first. 1 2 In stop mode, press [SETUP]. Select "Dubbing" using [K \ L], then press [ENTER\OK]. Connections 1 2 3 Press [PLAY B] to start the playback of the videotape you want to dub. Press [STOP C] or [PAUSE F] where you want to start dubbing. 3) Select a desired insert point using [K \ L], then press [ENTER\OK]. Note Dubbing will be cancelled 2 minutes before starting timer recording. VCR to HDD / DVD 3 Select "VCR A HDD" / "VCR A DVD" using [K \ L], then press [ENTER\OK]. e. g. ) VCR A HDD HDD A DVD DVD A HDD HDD A VCR VCR A HDD DVD A VCR VCR A DVD To erase all the titles in the dubbing title list: 1) Select "Delete All" in the dubbing menu using [K \ L], then press [ENTER\OK]. 2) Select "Yes" using [K \ L], then press [ENTER\OK]. 3) Select "Yes" using [K \ L], then press [ENTER\OK]. To go back and forth between dubbing menu and dubbing list, use [0 \ 1]. 4 Select a desired recording speed using [0 \ 1], then press [ENTER\OK]. Please select REC SPEED. XP SP LP EP SLP 3000 MB Confirmation message will appear. 7 8 After adding all the titles you want, select "Dubbing Start" in the dubbing menu using [K \ L], then press [ENTER\OK]. Select a desired recording speed using [0 \ 1], then press [ENTER\OK]. e. g. ) HDD A DVD High Please select REC SPEED. XP SP LP EP SLP Auto 500 MB Dubbing Titles 3000 MB 5 Select "Yes" using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No If dubbing continues when timer recording starts, the next display will appear. Timer Recording is in standby. Yes No e. g. ) HDD A VCR Please select REC SPEED. It may take awhile to prepare for the dubbing. To stop the dubbing in progress: Press [STOP C] on the front panel. [. . . ] Recording Error This disc is protected and not recordable. Insert a ver. (Compatible with CPRM. ) Remove the disc protect setting in "DVD Menu" menu. (See page 45. ) 80 EN Introduction Error message Recording Error Disc is full. (No area for new recording) Recording Error You cannot record more than 99 titles on one disc. [. . . ]