User manual FUNAI 19TVCRMKII

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] (Example: "03" for 3 programs) · The Index Search mode will be canceled if the procedures are not activated in 30 seconds. 3 Begin Index Search Press the Arrow button s or B. The TV/VCR/DVD begins rewinding or fast forwarding to the beginning of desired program. NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one. End of tape Pro. 6 Pro. 7 4 After Index Search 4 3 2 1 1 2 3 INDEX MARK When the preset program is reached, the TV/VCR/DVD will start playback automatically. · A video cassette must be inserted in the TV/VCR/DVD for this function to work. · The number of Index Searches can be set up to 20. · This function will not operate in the recording mode. · When you want to cancel the Index Search while in progress, press the STOP button. SPECIAL FEATURES REAL TIME TAPE COUNTER TV/VCR This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape. )The "­" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. AUTO REWIND-EJECT TV/VCR · When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR/DVD will eject the tape and turn itself to off. This function is operative when Repeat Play is set to the [OFF] position. The tape will not auto-rewind during timer recording or One Touch Recording. · · - 29 - EN 1C29 RECORDING Make sure . . . Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. SP 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette or one you want to record over, into the TV/VCR/DVD's cassette compartment. 3)Press the SPEED button on remote control for the TV/VCR/DVD to select the desired recording speed (SP/SLP). 4)Press the CHANNEL button K or L on the TV/VCR/DVD until "AUX" appears on the screen. 5)Press the RECORD button on the TV/VCR/DVD. 6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during copying, use the TV/VCR/DVD's front panel controls whenever possible. The remote control might affect the source (Playing) VCR's playback operation. 7)To stop copying, press the STOP/EJECT button on the TV/VCR/DVD, then stop the tape on the source VCR or camcorder. - 31 EN 1C29 TIMER AUTOMATIC TIMER RECORDING TV/VCR You may set the TV/VCR/DVD to start and end a recording while you are away. [. . . ] (Ejemplo: 5, PM) Luego, pulse el botón B. 7) Pulse el botón K o L hasta que aparezca el minuto deseado. (Ejemplo: 40) 8) Pulse el botón SETUP en el mando a distancia. Aunque los segundos no se visualizan, éstos empiezan a contar desde 00 cuando se pulsa SETUP en el mando a distancia. [. . . ]