User manual FUNAI 2960LV

[. . . ] Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal center. WARNING To prevent fire or shock hazard, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such as vases, shall be placed on the apparatus. To completely disconnect the power input, the mains plug of the apparatus should be disconnected from the mains on condition that the disconnected device is the mains plug of the apparatus. [. . . ] 1 LANGUAGE Setup Page 2 VIDEO Setup Page 3 SYSTEM Setup Page 4 RATING Setup Page Setup To select your preferred language for each language setting: 1. Select one of OSD, AUDIO, SUBTITLE and MENU LANG. The language options (ENGLISH / GERMAN / SPANISH / FRENCH) are displayed on the right. Press ENTER to confirm the selection. Setup Menu Navigation The following keys are used to display and navigate within the setup menu: SETUP Press to display and exit the Setup menu. / Video Setup Page This setup menu allows you to set the video interface to suit your TV system. Press to move left/right for selection. ENTER Press to confirm selection in submenus. / VIDEO SETUP VIDEO CVBS RGB Press to move up/down for selection. Language Setup Page This setup page enables you to select any of the available languages for on-screen display (OSD), system menus as well as subtitle and audio output for discs. Language options include ENGLISH (default), GERMAN, SPANISH and FRENCH. To turn on/off the SCART <RGB> output, you may adjust the setting as below: Select CVBS, then SCART will output CVBS signal. Select RGB, then SCART will output RGB signal. Select CVBS if you connect your TV to the system with a S-video cable, and SCART will output S-VIDEO signal normally. LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG Note ENGL ISH GERMAN SPANISH FRENCH OSD Language - Language options for all on-screen messages and system menus such as program play lists, info menus and the setup menu. System Setup Page In this setup page, you can set the TV color system, TV type (aspect ratio) and factory default setting. Audio Language - Only available when a multi-language DVD is playing. Subtitle Language - Only available if the DVD has more than one subtitles. Select "OFF" to remove subtitle from the screen. SYSTEM SETUP TV SYSTEM TV TYPE DEFAULT NTSC PAL AUTO Menu Language - Language options for disc menus such as disc player menus and title menus. 15 TV System - To select your TV color system: 1. Press SLOW repeatedly to play images in slow motion at variable speeds. To resume playback from the same place on the disc, press the Play button. To completely stop playback and restart the disc, press twice. To restart the disc, press the Play button. Press again to restore audio output. Basic Disc Playback Playing a DVD, CD or VCD 1 Turn on the TV and make sure the TV's video input source is set to view the DVD system. 2 Press the DVD button on the front panel, then go into DVD mode. 3 Press EJECT on the front panel or on the remote control to open the disc drawer. 4 Place the disc in the drawer with the label side facing up and the playback side facing down. If the disc has two playback sides, place the disc with the desired side facing down. 5 Press EJECT on the front panel or on the remote control again to close the disc drawer. The system will begin to play the disc after the disc drawer closes. [. . . ] Press PLAY button on the remote control to return to normal playback mode. Make sure all speakers and components are correctly and securely connected. Make sure to connect cables that are away from a transformer or motor, and at least 10 feet away from a TV or fluorescent light. Move your TV away from your audio components. [. . . ]