User manual FUNAI 2970LV

[. . . ] Use SELECT to choose options from your selected component's menu or guide. Use INFO to display current channel and program information. Press MENU to access the menu of your chosen component. Use the transport keys to control your VCR, or CD or DVD player. Use these keys for specific features on your dedicated components. 4. [. . . ] PROBLEM: LED blinks when you press a key, but home entertainment component does not respond. INSTALLING BATTERIES 1. On the back of the Catalyst 48, push the tab and lift off the battery cover. Obtain two (2) fully-charged AA alkaline batteries. Match the + and ­ marks on the batteries to the + and ­ marks in the battery case, then insert the new batteries. Press the battery cover back into place. The tab should click when the cover is locked. Test the unit by pressing PWR and any mode key (e. g. , AUX, CBL, VCR, etc. ). If the batteries are inserted correctly, the LED will blink once. NOTE: When batteries need replacement, the Catalyst 48 will blink twice with every key press. Simply replace them and the remote control will be restored to its full functionality, including favorite settings. 5. Repeat steps 1 through 4 for each component you want the Catalyst 48 to control. PROGRAMMING TV/VCR COMBO CONTROL Perform the following instructions to control a TV/VCR Combo: 1. Turn on the TV/VCR Combo and insert a video cassette. for Funai, is the complete solution for all of your remote control requirements. It is designed to operate from four to eight devices with the emphasis on features and functions of your dedicated component(s). The Catalyst 48 requires two (2) fresh AA alkaline batteries (not included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep these instructions for future reference. 1. Turn on a component (e. g. , VCR) and, if applicable, insert media, (e. g. , cassette or disc). NOTE: Please read steps 2-4 completely before proceeding. We recommend highlighting or writing down the codes and device you wish to program before moving onto step 2. On the Catalyst 48, press a component key once (i. e. , AUX, CBL, VCR, TV, SAT, CD, AMP, or TNR). Press and hold SETUP until the LED blinks twice, then release SETUP. Use the Manufacturer's Codes (on the back side) to locate the the type of component and brand name and then enter the first four-digit code for your component. [. . . ] Press and hold SETUP until the LED blinks twice, then release SETUP. The LED will blink twice. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the Catalyst 48 after entering the channel number. PROBLEM: Tried "Search Method" and still could not find a working code. FEATURES AND FUNCTIONS Use the Key Charts to learn how the Catalyst 48 functions. To change Volume Lock back to the TV mode: 1. On the Catalyst 48, press and hold SETUP until the LED blinks twice, then release SETUP. [. . . ]