User manual FUNAI 4913CLT

[. . . ] Retain Instructions-The safety and operating instructions should be retained for future reference. Follow Instructions-All operating and use instructions should be followed. Cleaning-Unplug TV/VCR from the wall outlet before cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. [. . . ] Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again. 2)Select where you want to change using the F. 3)Enter correct numbers using the PLAY/K or STOP/L button. 4)Press the MENU button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the F. FWD/B or REW/s button to turn [OFF] this function. Enter the desired channel number Press the PLAY/K or STOP/L button until your desired channel number appears. for best results , we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds. On the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. avoid extreme heat , high humidity and magnetic fields. Do not tamper with the cassette mechanism. Do not touch the tape with your fingers. [. . . ] Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR may need to be cleaned. Should your TV/VCR become inoperative, do not Try to correct the problem by yourself. There are no user-serviceable parts inside. [. . . ]