User manual FUNAI 550

[. . . ] Follow Instructions- All operating and use instructions should be followed. Cleaning- Unplug this video product from the wall outlet before cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. Attachments- Do not use attachments not recommended by the video product manufacturer as they may cause hazards. [. . . ] Using AUDIO/VIDEO Input Jacks You can use the A/V input jacks on the front or the back of the VCR. ⷠTo use the input jacks on the back of the VCR, select "L1" position by pressing [0], [0], [1] on the remote ) ]. control or [CHANNEL ( · To use the input jacks on the front of the VCR, select "L2" position by pressing [0], [0], [2] on the remote ) ]. Control or [CHANNEL ( "L1" or "L2" is found [Playing VCR] before the lowest memorized channel. Disconnect the AC power cord of the TV from the AC outlet. Plug the AC power cords of the VCR and TV into the AC outlets. If your TV does not have A/V terminals: When the VCR is in the Playback mode or when the VCR is in the VCR mode, your TV will receive signals from the VCR on either channel 3 or 4. To use the VCR with your TV, set the selector switch to CH3 or CH4 (which is located in the back of your VCR), whichever is not CH3 CH4 used for normal broadcasts in your area. You can automatically program the tuner to scan only the channels you receive in your area. ⷠChannel memory programming is NOT needed when you connected the VCR to a cable box or satellite box as in "Connect VCR to TV". In this case, select the VCR and TV to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. reduce it by pressing [CHANNEL ( · After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. We suggest that you use a TV or radio station as your time source. This feature allows you to play a tape over and over. FWD] at step [3] so that [OFF] appears next to "AUTO REPEAT". ⷠWhen you set the Auto repeat mode to [ON] while the Counter memory mode is ON, the VCR will exit the Counter memory mode automatically. PICTURE SEARCH If you want to skip or repeat a scene during playback, press [F. Press it again and the VCR will now search in super high speed. If you want to view a recording at a specific start point, it can easily be done. 1 Press [SEARCH MODE] so that the Index Search menu appears. INDEX SEARCH 2 Enter your desired number by 03 pressing [PLAY] or [STOP] within 30 seconds. If you want to go in the forward direction, press [F. [. . . ] Should your VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line at Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. ⷠPlayback picture may become blurred or interrupted while the TV program reception is clear. [. . . ]