User manual FUNAI 6260CVA

[. . . ] Read Instructions- All the safety and operating instructions should be read before the appliance is operated. Retain Instructions- The safety and operating instructions should be retained for future reference. Heed Warnings- All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions- All operating and use instructions should be followed. [. . . ] (in the LP/SLP modes only) · To go back one step, press [REW]. 4 Start the clock by pressing [EXIT/RESET] or [F. FWD]. ­4­ EN INDEX SEARCH The index signal is recorded on the tape automatically when the recording is started. If you want to view a recording at a specific start point, it can easily be done. 1 Press [SEARCH MODE] so that the Index Search menu appears. INDEX SEARCH 2 Enter your desired number by 03 pressing [PLAY] or [STOP] within 30 seconds. 3 Press [F. FWD] or [REW] to start index search. If you want to go in the forward direction, press [F. FWD]. If you want to go in the reverse direction, press [REW]. · After index search, the VCR will play the tape automatically. TIME SEARCH This feature allows you to fast forward or rewind the tape for a desired length of time. 1 Press [SEARCH MODE] so that the Time Search menu appears. 2 Enter your desired time to skip by pressing [PLAY] or [STOP] TIME SEARCH 2 : 50 within 30 seconds. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. 2 Press [STOP] when recording is completed. First, press [PLAY] or [STOP] for the hour. Next, press [PLAY] or [STOP] for the minute. And then, press [PLAY] or [STOP] for AM or PM. Then, press [F. FWD]. Set the end time Follow the instructions of "Set the start time" to set the end time. Set the channel number OTR(One Touch Recording) This feature allows you to set the recording length simply by pressing [REC/OTR] on the VCR. 1 Begin OTR by pressing [REC/OTR] on the VCR repeatedly until the desired recording length appears. REC (Normal recording) OTR(8:00) OTR(0:30) OTR(1:00). . . . . Press [PLAY] or [STOP] repeatedly for the desired channel number. If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. Leave the cable box or satellite box on for timer recording. Set the tape speed ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05/13 MON START TIME 07:30 PM END TIME 08:30 PM CHANNEL 16 REC SPEED SP SP SLP Press [PLAY] or [STOP] repeatedly for the desired tape speed. Then, press [F. FWD]. OTR(7:30) · To go back one step, press [REW]. [. . . ] Pulse [POWER] para encender la videograbadora. Seleccione "ENGLISH" o "ESPAÑOL" (Spanish) pulsando [PLAY] o [STOP]. El sintonizador explora y memoriza todos los canales activos de su zona. Tras la exploración, el sintonizador se detiene en el canal memorizado más bajo. PREPARACIÓN DEL RELOJ 1. [. . . ]