User manual FUNAI 6480

[. . . ] 4 Moisture Condensation Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording. · Press [STOP/EJECT C A] on the front panel or [SUBTITLE/T-SET] on the remote control to use the VCR when the unit is off. · Press [SOURCE] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in standby mode, press [STOP/EJECT C A] on the front panel or [SUBTITLE/T-SET] on the remote control, and then press [SOURCE] on the front panel or [VCR] on the remote control. If you want to use the DVD player during a Timer Recording or while TIMER indicator on the front panel is on or blinking. · Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. NOTE (for Timer Recording) : · If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost. ­ 13 ­ EN VCR Functions PROGRAM NUMBER 1 DATE 1 0 / 2 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED SP B SP SLP 1) Press [SUBTITLE/T-SET] then, [VCR] on the remote control. 3) Select "TIMER PROGRAMMING" by using [K/L], then press [B]. 4) Select the program number which you want to check by using [K/L]. The details of the program you selected will appear on the TV screen. · Go to the digit you want to change by using [s/ B]. This happens while the 1st layer is being switched to the 2nd layer. TIP: You can change the On-Screen language in "PLAYER MENU" setting. (Refer to page 20. ) 1 Press [STANDBY-ON] to turn on the DVD/CD Player. 2 Press [OPEN/CLOSE A] and insert a disc with label facing up. 4 Press [STOP C] to stop playback. 1 4 7 2 5 8 0 3 SKIP/CH. 6 VCR/TV 9 SLOW +10 DVD PAUSE DISPLAY VCR 3 4 PLAY STOP DVD menu DVD DV Fast Forward / Reverse Search DVD DV Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]). Calling Up a Menu Screen during Playback DVD DV · Press [MENU] to call up the DVD menu. · Press [TOP MENU] to call up the title menu. Hint · Fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and 5(x32). Hint · Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details. Slow Forward Search DVD DV Resume DVD DV Press [STOP C] during playback. Resume icon will appear at the top-left on the TV screen. Press [PLAY B], playback will resume from the point at which playback was stopped. R. STOP Hint · To cancel resume, press [STOP C] one more time in the stop mode. [. . . ] · To set virtual surround · To set virtual surround on/off. · To open or close the disc tray. · To advance playback one frame at a time. · To open or close the disc tray. [. . . ]