User manual FUNAI 7810

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] ¡Any other discs without compatibility indications ¡ - 19 - EN PLAYING A DISC BASIC PLAYBACK DVD-V Getting started ¡Turn on the power of amplifier and any other com- GENERAL FEATURES CD DVD-V DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or [K / L / s / B] to highlight your selection in the DVD main menu and press [ENTER] to confirm. NOTES: ¡Select DVD mode by pressing [SELECT], then operate the DVD functions. ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. ponents, if necessary. 1 Press [POWER]. 2 Press [OPEN/CLOSE A] to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DISC MENU DVD-V 1 Press [DISC MENU]. ¡If the feature is not available, symbol may appear on the TV screen. ¡If disc menu is available on the disc, audio lan- 4 Press [PLAY O]. ¡The tray will close automatically and playback will then start from the first chapter or track of the disc. ¡Closing the disc tray manually or by pressing [OPEN/CLOSE A] also starts playback. ¡If the playback does not start automatically, press guage, subtitle options, chapters for the title and other options will appear for selection. [PLAY O]. ¡When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to "TITLE MENU" on this page. 2 Press [K / L / s / B] to select an item and press [ENTER] to confirm selection. TITLE MENU DVD-V 1 Press [TITLE]. Approximate speed is 1(×2), 2(×8), 3(×20), 4(×50) and 5(×100). ¡For Audio CDs approximate speed is 1(×2), 2(×8) and 3(×30). ¡When you press buttons on the front panel, press and hold [SEARCH E / D] for a few seconds. 3 To return to normal playback, press [PLAY O]. - 21 - EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. TIME SEARCH DVD-V CD 1 During playback, press [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons 1 Press the Number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the Number buttons. ¡Playback will start at the specified time. ¡Press [CLEAR] to erase the incorrect input. ¡When there is no need to enter a number, "0" (eg. track 3, press [3]). ¡To play track 26, press [+10], [2], [6]. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes. Using [SEARCH MODE] 1 Press [SEARCH MODE]. ¡The track search display appears. [. . . ] ¡La alimentación se conectará. 2 Presione [OPEN/CLOSE A] para abrir la bandeja de carga del disco. 2 Presione [K / L / s / B] para hacer una selección y presione [ENTER] para confirmar la selección. 3 Ponga el disco deseado en la bandeja, con la etiqueta hacia arriba. REANUDACIÓN DVD-V 1 Durante la reproducción, presione CD 4 Presione [PLAY O]. ¡La bandeja se cerrará automáticamente y la [STOP C]. ¡Aparecerá el mensaje de continuación en la pantalla de TV. reproducción comenzará desde el primer capítulo o 2 Presione [PLAY O], la reproducción continuará pista del disco. [. . . ]