User manual FUNAI C6427TD

[. . . ] SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards. We feel confident that in normal use, it will provide you with satisfactory performance. However, should you experience difficulty, you are protected under the provisions of this warranty. [. . . ] CHANNEL L/M buttons- Press to select memorized channel. NOTE:You MUST PRESET channels BEFORE using CHANNEL L/M buttons. (See CHANNEL PRESETTING) Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. POWER button- Press to turn the TV ON and OFF. Infrared Sensor Window- Receives the infrared control signals from the remote control unit. 10. CHANNEL NUMBER buttons- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 button- Press to select cable channels higher than 99. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by pressing the INPUT SELECT button on the remote control. · To use the jacks on the back of the TV, select "VIDEO1". · To use the jacks on the front of the TV, select "VIDEO2". NOTES: · You may also set the Game mode by pressing the GAME button on the remote control. "GAME" appears on the TV screen. In this case, connect the external source to the AUDIO/VIDEO jacks on the front panel. (See PICTURE ADJUSTMENT. ) · When you use the S-VIDEO connection, S-VIDEO jack on the rear panel is given priority over the VIDEO (rear)jack. PREPARATION FOR USE INSTALLING THE BATTERIES 1) Slide the battery compartment cover on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) L or M button to point to "CHANNEL SET". 3) Press the VOL(ume) L button so that "ADD/DELETE" is selected. 4) Use the CH(annel) L or M button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the screen in about 10 seconds. [. . . ] It could save your time and money. Poor Reception on Some Channels Different color marks on screen Remote Control Doesn't Work MAINTENANCE CABINET CLEANING G Wipe the front panel and other exterior sur- PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord. Lines or Streaks in Picture Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST No Picture or Sound Bars On Screen Picture Blurred Weak Picture No Color faces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces. PROBLEM POSSIBLE REMEDY SUPPLIED ACCESSORIES Remote control unit (N0160UD) Batteries ("AA" x 2) Owner's Manual Owner's Manual Try a new channel, if OK, then possible station trouble. [. . . ]