User manual FUNAI CIWL3706

[. . . ] OWNER'S MANUAL CIWL3706 37 INCH ANALOG / DIGITAL LCD TELEVISION HIGH-DEFINITION TELEVISION TO RECEIVE ANALOG/DIGITAL SIGNAL YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045, OR VISIT OUR WEB SITE AT http://www. funai-corp. com WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. [. . . ] · When you press [INPUT SELECT] or [CH K/L] on the remote control, the input mode will be switched as below. TV/DTV channel Video1 Video2 Component1 5) When using HDMI IN jack Component2 Component1 1080i HD NONE 4) When using COMPONENT2 input jacks Component2 1080i HD NONE HDMI HDMI : press [CH K] 1080i HD 16:9 NONE · To use the VIDEO1 or S-VIDEO1 input jack on the TV, select "Video1". · To use the VIDEO2 or S-VIDEO2 input jack on the TV, select "Video2". · To use the COMPONENT1 input jacks on the TV, select "Component1". · To use the COMPONENT2 input jacks on the TV, select "Component2". · To use the HDMI IN jack on the TV, select "HDMI". · The information display will automatically disappear in one minute. 20 EN CHANGING THE SCREEN DISPLAY MODE Each 4 types of display mode can be selected in the screen mode in both 4:3 and 16:9 TV aspect ratio. You can select your favorite screen mode and enjoy the program. AUDIO 1 Switch the Screen mode. · Every time you press [SCREEN MODE], the TV aspect ratio will be switched alternately. 2 7 SETUP 8 0 9 STILL Press [SCREEN MODE] repeatedly until the normal screen displays. NOTE: · You may not switch the display mode depending on the program. SCREEN MODE ENTER BACK INFO When the broadcast is sending 4:3 video signal. . . When the broadcast is sending 16:9 video signal. . . Sidebar (normal) Full Full (normal) Zoom Wide Cinema Expand Cinema [Sidebar] Sidebar will display a 4:3 picture at its standard 4:3 size. Sidebars will be displayed on the right and left edges of the screen. [Full] Full will display a 4:3 picture at a 16:9 size, with horizontal elongation necessary to fill the screen. [Cinema] Cinema will display a 4:3 picture at a 16:9 size, with less horizontal elongation necessary to fill the screen because a little bit of the top and bottom edge of the screen will be cut off. [Wide] Wide will display the center of the picture as original size and the outer sides of the picture will be elongated. The size of the picture will depend on the original signal. [Full] A picture will be displayed at 16:9 size as it is. [Zoom] Zoom will display a 16:9 picture without changing its horizontal to vertical ratio, at its maximum size. [Cinema] Cinema will display a 16:9 picture with vertical elongation. [Expand] Expand will display a 16:9 picture with horizontal elongation. 21 EN WATCHING TV SCREEN INFORMATION You can display the currently selected channel number or other information such as the audio mode on the screen for checking. AUDIO DTV In the digital mode, the detailed information for the currently selected channel such as the Program guide is displayed. 7 SETUP 8 0 9 STILL 1 Display the detailed information for the channel. · Press [INFO] on the remote control. The currently selected program details are displayed on the screen. · The following information is displayed. (1) Program title (2) Broadcast station (3) Program guide (max. 4 lines displayed) (4) Channel number (5) Audio language ("Other" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. ) (6) Effective scanning lines and scan mode (7) Program definition (8) Program aspect ratio (9) Program rating (10) CC (Not available if the CC set to "Off") (1) Buffy Vampire Slayer SCREEN MODE ENTER BACK INFO CH RETURN VOL. MUTE CH TV In the analog mode, the currently selected channel number and the audio mode are displayed. 1 Display the channel number and the audio mode. [. . . ] Before cleaning the LCD, disconnect the power cord. SERVICING Should your unit become inoperative, do not try to correct the problem by yourself. There are no user serviceable parts inside. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center. 34 EN SPECIFICATIONS GENERAL SPECIFICATIONS Television system: ATSC NTSC-M TV Standard ELECTRICAL SPECIFICATION Sound output: 5W, 8 ohm x 2 OTHER SPECIFICATIONS Remote control: Operating temperature: Digital encoded infrared light system Closed Caption System: §15. 119/FCC (Analog CC) §15. 122/FCC (Digital CC) Channel coverage (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W, W+1 ~ W+94, A-5 ~ A-1, 5A Tuning System: Channel frequency synthesized tuning system Channel access: Direct access keyboard, Programmable scan, and Up/down Terminals Antenna input: VHF/UHF/CATV 75 ohm unbalanced (F-type) S-Video input: Mini DIN 4-pin jack x 2 Video input: RCA jack x 2 Audio input: RCA jack (L/R) x 4 Component Video/Audio input: One pin jack (Y) / 1Vpp x 2 Two pin jacks (Pb/Pr) / 700mVpp x 4 RCA jack (L/R) x 4 HDMI / Audio input: HDMI jack RCA jack (L/R) x 2 Coaxial digital audio output: One pin jack, 500mVpp Analog Audio output: RCA jack (L/R) x 2 Stereo Sound System Speaker · Designs and specifications are subject to change without notice and without our legal obligation. · If there is a discrepancy between languages, the default language will be English. 35 EN MISCELLANEOUS / SPECIFICATIONS 5°C to 40°C (41°F to 104°F) Power requirements: AC120V, 60Hz Power consumption (Maximum): 205W LCD: 37" wide XGA panel (1, 366 x 768 pixels) Dimensions: <Without stand> H : 26-9/16" (674mm) W: 37-5/16" (948mm) D : 4-12/16" (120mm) <With stand> H : 28-5/16" (718. 5mm) W: 37-5/16" (948mm) D : 12-13/16" (325mm) Weight: 52. 8 lbs. [. . . ]