User manual FUNAI DTK4400

[. . . ] VIDEO CASSETTE RECORDER OWNER'S MANUAL DTK4400 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS IMPORTANT Use only cassettes marked VHS with this appliance. CAUTION 1. There are no parts inside you can service. [. . . ] 1 Press [SEARCH MODE] so that the Index Search menu appears. INDEX SEARCH 2 Enter your desired number by 03 pressing [PLAY] or [STOP] within 30 seconds. 3 Press [F. FWD] or [REW] to start index search. If you want to go in the forward direction, press [F. FWD]. If you want to go in the reverse direction, press [REW]. · After index search, the VCR will play the tape automatically. TIME SEARCH This feature allows you to fast forward or rewind the tape for a desired length of time. 1 Press [SEARCH MODE] so that the Time Search menu appears. 2 Enter your desired time to skip by pressing [PLAY] or [STOP] TIME SEARCH 2 : 50 within 30 seconds. 3 Press [F. FWD] or [REW] to start time search. If you want to go in the forward direction, press [F. FWD]. If you want to go in the reverse direction, press [REW]. · After time search, the VCR will play the tape automatically. RECORDING FUNCTION It may be unlawful to record playback copyrighted material without the consent of the copyright owner. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover Record safety tab the hole with cellophane tape. TIMER RECORDING You may set the VCR to start recording while you are away. You can set seven programs to record on specific days, daily or weekly within a 1 year period. 1 Insert a tape with its safety tab into the VCR. 3 Select "TIMER PROGRAMMING" by pressing [PLAY] or [STOP]. · If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET UP" section. 4 Set the timer. Set the program number (1~7) Before recording, make sure: · The desired channel is selected by pressing [Number] on ) ]. (If you the remote control or the [CHANNEL ( connected the VCR to a cable box or satellite box as in "VCR to TV connections" on page 3, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. [. . . ] · Make sure the VCR is not in the Menu mode. · Select channel 3 or 4 at your TV, then press [VCR/TV] so that the VCR indicator on the VCR comes on. TV programs cannot be seen · Re-check the ANT. · Press [VCR/TV] so that the VCR indicator on the VCR disappears. [. . . ]