User manual FUNAI DVC840G

[. . . ] Please read before using this unit. Owner's Manual DVD/CD Player with Video Cassette Recorder DVC840G INSTRUCCIONES EN ESPAÑOL INCLUIDAS. RF cable (WPZ0901TM002) Remote control (NB177UD) with two AA batteries or visit our web site at http://www. SylvaniaConsumerElectronics. com Table of Contents Precautions Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Location and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Avoid the Hazards of Electrical Shock and Fire . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ) Select "TIMER PROGRAMMING" by using [K/L], then press [B]. 4) Select the program number which you want to check by using [K/L]. The details of the program you selected will appear on the TV screen. · Go to the digit you want to change by using [s / B]. Then, enter correct numbers by using [K/L]. · You may cancel the entire program by pressing [s] while the program number blinks. 6) Press [SUBTITLE/T-SET] to return to timer standby mode. Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) (Back of another source) or DVD/VCR COMPONENT VIDEO OUT (Back of DVD/VCR*) VCR AUDIO OUT AUDIO OUT L AUDIO IN Y CB CR R VIDEO OUT VIDEO VIDEO OUT IN Connect ANT-OUT 1 ANT-IN DIGITAL AUDIO OUT DVD AUDIO S-VIDEO OUT OUT DVD/VCR COMPONENT VIDEO OUT VCR AUDIO OUT Y CB L AUDIO IN ANT-IN L R VIDEO OUT Connect RF cable (supplied) 2 COAXIAL R CR VIDEO IN ANT-OUT (commercially available) Audio/Video cables *Front input jacks are also available 7) To stop recording, press [STOP/EJECT C A] on the recording unit, then stop playback of the tape in another source. 1) Insert a pre-recorded tape into another VCR for playing. 2) Insert a tape with its record tab into this unit for recording. ) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L] on this unit. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L] on this unit. 5) Press [REC/OTR] on the recording unit. 6) Begin playback of the tape in another source. Hint · For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. · Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. · You can use a video disc player, satellite receiver or other audio/video component with Audio / Video outputs. · "L1" or "L2" is found before the lowest memorized channel. (Example: CH02) · "L2" input jacks are on the front of this unit. VCR Functions ­ 14 ­ EN Playback DVD Functions Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel. 2 DVD ( 1 POWER OPEN/CLOSE /EJECT Page 16 ) 1 POWER SPEED AUDIO OPEN/CLOSE /EJECT 1 4 7 2 5 8 0 3 SKIP/CH. 1 POWER REW F. FWD STOP/EJECT PLAY / OPEN/CLOSE 6 VCR/TV 2 9 +10 DVD SLOW VIDEO OUTPUT VCR REC/OTR CHANNEL DVD PROGRESSIVE SCAN SKIP H STOP PLAY G SKIP Insert a disc with label facing up. AUDIO DISPLAY VCR PAUSE REV FWD 3 4 Hint PLAY STOP REC/OTR 1 RETURN CLEAR/ C. [. . . ] · To set virtual surround on/off. · To eject the video cassette from the VCR. · To pause tape playback or recording. · To advance playback one frame at a time. [. . . ]