User manual FUNAI DVC865G

[. . . ] Please read before using this unit. Owner's Manual DVD/CD Player with Video Cassette Recorder DVC865G INSTRUCCIONES EN ESPAÑOL INCLUIDAS. RF cable (WPZ0901TM002) Remote control (NB177UD) with two AA batteries TOLL FREE : 1-800-968-3429 or visit our web site at http://www. SylvaniaConsumerElectronics. com Table of Contents Precautions Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Location and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Avoid the Hazards of Electrical Shock and Fire . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Go to the digit you want to change by using [s/B]. Then, enter correct numbers by using [K/L]. · You may cancel the entire program by pressing [s] while the program number blinks. 6) Press [SUBTITLE/T-SET] to return to timer standby mode. Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) (Back of another source) AUDIO OUT DVD/VCR VCR AUDIO IN (Back of DVD/VCR*) L or COMPONENT VIDEO OUT AUDIO OUT Y L L CB R VIDEO OUT R R Connect ANT-OUT 1 ANT-IN DIGITAL AUDIO OUT DVD AUDIO S-VIDEO OUT OUT DVD/VCR COMPONENT VIDEO OUT VCR AUDIO IN AUDIO OUT ANT-IN L L Y L CB COAXIAL R CR Connect RF cable (supplied) 2 R VIDEO OUT R VIDEO IN VIDEO VIDEO OUT IN CR ANT-OUT Audio/Video cables (supplied) *Front input jacks are also available 7) To stop recording, press [STOP/EJECT C A] on the recording unit, then stop playback of the tape in another source. 1) Insert a pre-recorded tape into another VCR for playing. 2) Insert a tape with its record tab into this unit for recording. 3) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L] on this unit. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L] on this unit. 5) Press [REC/OTR] on the recording unit. 6) Begin playback of the tape in another source. Hint · For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. · Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. · You can use a video disc player, satellite receiver or other audio/video component with Audio / Video outputs. · "L1" or "L2" is found before the lowest memorized channel. (Example: CH02) · "L2" input jacks are on the front of this unit. VCR Functions MTS System (Multi-Channel Television Sound) When You Receive or Record a Program Broadcast in MTS · When you receive a broadcast on this unit, you can check the type of the broadcast by pressing [DISPLAY]. · When "TV STEREO" or "SAP" selection is valid, select them by following steps. This selection is needed when you record the program. · SAP means Second Audio Program (usually second language). Display on the TV screen -NoneSTEREO Type of broadcast Regular (monaural audio) Stereo broadcast Bilingual broadcast STEREO/SAP Selection -Invalid-InvalidTV STEREO (stereo main audio program) SAP (second audio program) TV STEREO (stereo main audio program) SAP (second audio program) VCR 1 Press [MENU], then select "TV STEREO" or "SAP". Then press [B] to set to "ON". -MENUMENU or TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT B TV STEREO [ON] SAP 2 To exit the menu CLEAR/ C. [. . . ] · To advance playback one frame at a time. · To turn the unit on/off. · To arrange the playing order or play randomly. · To set virtual surround on/off. Insert a disc with label facing up. PAUSE · To pause disc playback. · To pause tape playback or recording. · To advance playback one frame at a time. [. . . ]