User manual FUNAI DVL100CC

[. . . ] OWNER'S MANUAL DVD PLAYER DVL100CC If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 287- 4871 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] Follow the instruction supplied with the RF Modulator for more details. If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked "ANT IN"), then connect the RF modulator to your TV's antenna terminal as described above. Note ¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal through an RF Modulator. ­ 12 ­ EN 2A10 PLAYING A DISC PLAYING A DVD VIDEO OR AN AUDIO CD DVD Getting started Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct. ) Notes ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. ¡If a disc is dirty or has scratches, the pictures may CD 1 Press the POWER button. 2 Press the OPEN/CLOSE button. ¡The disc loading tray will open. appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. ¡With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. ¡During the playback of two layered disc, pictures 3 Place a disc into the tray. ¡Make sure the disc is sitting properly in the correct recess, with the label side up. may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. USING THE DVD MENUS DVD Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. 4 Press the PLAY button. ¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button. ¡When you playback the DVD which a title menu is 1 Press the MENU button. ¡The DVD menu will appear. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the recorded, it may appear on the screen. In this case, refer to "USING THE TITLE MENU". setting, and then press the ENTER button. 5 Press the STOP button to stop play. 3 Playback will start from the selected title. ­ 13 ­ EN 2A10 USING THE TITLE MENU DVD With a DVD containing a title menu, you can select desired titles from the menu. RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED DVD CD 1 Press the STOP button during playback. 1 Press the TITLE button. ¡The title menu will appear. ¡Playback will stop, and then appear the resuming message at the center. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button. Press 'PLAY' to play from here. To play the beginning, press 'STOP' first and then 'PLAY'. CALLING UP A MENU SCREEN DURING PLAYBACK For DVDs ¡Press the MENU button to call up the DVD menu. ¡Press the TITLE button to call up the title menu. 2 Press the PLAY button. Playback will start from the point where the previous playback session was stopped. B Note ¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. Note ¡The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray. PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE DVD CD STEPPING THROUGH FRAMES DVD 1 Press the PAUSE button while playback is paused. ¡The next picture frame is disF 1 Press the PAUSE button during playback. ¡Playback will pause, with sound F muted. played with sound muted each time the button is pressed. 2 Press the PLAY button to resume playback. B 2 Press the PLAY button to resume playback. B ­ 14 ­ EN 2A10 FAST FORWARD/REVERSE DVD CD STARTING FROM A DESIRED TRACK CD 1 Press the numeric buttons to enter the desired track number. ¡The selected track will be located, and playback will start. 1 Press the FWD g or REV h button during playback. ¡For DVDs, pressing the FWD g or REV h but- ton cycles the playback speed in four steps. ¡For audio CDs, the playback speed is ×16 fixed. REV E Button Ex2 FWD D Button Dx2 You can also press the SEARCH MODE button, use the numeric buttons to enter the track number. When the track number is entered in the entry box, playback of the desired track will start automatically. TR : 5 TRICKS WITH THE SKIP BUTTONS (H, G) Ex8 Dx8 Ex30 Dx30 Ex60 Dx60 If the SKIP button G is pressed during playback or while playback is paused, the current track will be skipped and the next track will be played. When the SKIP button H is pressed once, the top of the current track will be located for replaying. [. . . ] ¡Do not use a hard cloth since this will mar the disc. ¡Wipe the disc in a straight line from center to edge. ¡Never wipe with a circular motion. (Optical audio digital discs. ) ¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. ¡Do not use detergent or abrasive cleaning agents. ¡Always store the disc in its protective case when it is not used. ­ 30 ­ EN 2A10 SPECIFICATIONS Product type : Discs : DVD Player DVD video Audio CD NTSC color 20 Hz to 22 kHz (sample rate: 48 kHz) 20 Hz to 44 kHz (sample rate: 96 kHz) 20 Hz to 20 kHz Output signal format : Frequency response DVD (linear sound) : CD : Signal-to-noise ratio (S/N ratio) CD : 110 dB (EIAJ) Dynamic range DVD (linear sound) : CD : Total distortion factor CD : Wow and flutter : Connections S-Video output : Video output : Coaxial digital audio output : Analog audio output : Component video output : Power source : Power consumption : Operating temperature : Dimensions : 95 dB 94 dB (EIAJ) 0. 005% (EIAJ) Below the measurement limitation (+/-0. 001% W PEAK) (EIAJ) Mini DIN 4-pin jack (75 ohm) One RCA connector, 1 Vpp (75 ohm) One pin jack, 500mVpp (75 ohm) Two RCA connectors (one left channel, one right channel) 2 Vrms (47 kilo-ohm) One pin jack (Y), 1 Vpp (75 ohm) Two pin jacks (CB)/(CR), 700mVpp (75 ohm) 120 V AC +/- 10%, 60 Hz +/- 0. 5% 14 W (standby: 2. 2W) 5°C to 40°C W 17-1/8" (435mm) H 3" (75mm) D 8-5/16" (211mm) Weight : 4. 63 lbs (2. 1kg) ¡Designs and specifications are subject to change without notice. ¡If there is a discrepancy between languages, the default language will be English. ­ 31 ­ EN 2A10 SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. [. . . ]