User manual FUNAI DVL120RB

[. . . ] OWNER'S MANUAL DVD PLAYER DVL120RB DVD/CD PLAYER OPEN/CLOSE PLAY PAUSE SEARCH SKIP SEARCH STOP POWER INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 968-3429 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] When the SKIP button H is pressed again while Within 2-second playback, the previous track is located. SLOW MOTION DVD 1 Press the FWD g button while playback is paused. (Sound remains muted. ) ¡Slow motion mode will be activated. ¡Pressing the FWD g button cycles the playback STARTING FROM A DESIRED TIME COUNT DVD 1 Press the SEARCH MODE button. ¡Press the button twice for DVDs CD speed in three steps. Select an appropriate speed while referring to the speed indication on the screen. FWD D Button ×1/16 or two times for audio CDs. Search Time _:__:__ Total Time 1:29:00 ×1/8 2 Press the numeric buttons to set the desired time count. ¡Example: 1 hour, 23 minutes and Search Time _:__:__ Total Time 1:29:00 ×1/2 30 seconds 12330 2 Press the PLAY button to return to normal playback speed. Notes ¡In the case of DVD, Time Search in Title is effec- Notes ¡Slow playback is not available with audio CDs. ¡The reverse of slow playback is not available. tive. (But Time Search in Chapter is ineffective. ) ¡In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective. ) ¡Playback from a desired time count is not available STARTING FROM A DESIRED TRACK CD with some discs. ¡Specific time playback is not available with some discs or if the unit is in stop mode. ­ 15 ­ EN 9F21 PLAYING FROM A DESIRED TITLE OR CHAPTER DVD You can also press the SEARCH MODE button, use the numeric buttons to enter the chapter number. ¡Perform the title search and the REPEAT DVD 1 Press the REPEAT button. CD For DVDs ¡A single title or chapter is played back repeatedly. ¡Pressing the REPEAT button cycles the display on chapter search after setting them on the same screen at the same time. Changeover by K/L buttons. Search Title : 1/4 Chapter:__ / 17 the screen as follows. Repeat [Title] The current Title is played back repeatedly. The current Chapter is played back repeatedly. No repeat playback. Repeat [Chapter] Note ¡Playback from a desired title or Search Title : 1/4 Chapter:__ / 17 Repeat [Off] chapter is not available with some DVDs. RANDOM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program setting menu screen will appear. For audio CDs ¡The whole disc or a single track is played back repeatedly. ¡Pressing the REPEAT button cycles the display on the screen through All, Repeat Track and Off. Repeat [All] 2 Press the MODE button again. Audio CD Random The whole Disc is played back repeatedly. The current Track is played back repeatedly. No repeat playback. Repeat [Track] Start : PLAY Exit : MODE Repeat [Off] 3 Press the PLAY button. Random playback will then start. Note ¡Program playback is not available during random playback. If the REPEAT button is pressed once during program/random playback, the program/random playback is performed repeatedly. If the REPEAT button is pressed again, the current track is played back repeatedly. Notes ¡Repeat playback is not available with some discs. ¡The REPEAT setting will be cleared when moving to other title, chapter or track. ­ 16 ­ EN 9F21 A-B REPEAT DVD CD PROGRAM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program screen will appear. Audio CD Program Total [Track] ­­ [Time] 0:00:00 Track 00 / 15 Start : PLAY Delete : CLEAR Random : MODE Exit : RETURN You can define a section to be played back repeatedly. 1 Press the A-B REPEAT button during playback. ¡The starting point (A) will then be Repeat [A- ] selected. 2 Press the numeric buttons to enter the desired track numbers. Audio CD Program Total [Track] 12 [Time] 0:47:29 02 05 07 14 01 09 13 10 03 11 08 04 2 Press the A-B REPEAT button again at the end point (B) of the desired section. ¡The selected section will be Repeat [A-B] ¡The total playback time for the selected tracks will appear on the TOTAL line. Track 04 / 15 Start : PLAY Delete : CLEAR Random : MODE Exit : RETURN played back repeatedly. 3 Press the PLAY button. ¡Playback will start in the programmed order. 3 To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF. Repeat [ off ] ¡While the program is being played back, the STOP Notes ¡With DVDs, the A-B repeat section can be set only within the current title. ¡With audio CDs, the A-B repeat section can be set within the current track. ¡A-B repeat is not available with some scenes in button works as follows. ¡Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Program continued) ¡Press the STOP button twice and then the PLAY button again, playback will restart from the first tune in the program in the usual way. (Program continued) ¡Press the STOP button three times and then the PLAY button again, playback will restart from the track in the usual way. [. . . ] Consulte la figura 4 de la página 11 PARA TELEVISORES CON TOMA DE ENTRADA DE VÍDEO S Utilice un cable de vídeo S (de venta en el comercio) en lugar del cable de vídeo amarillo para disfrutar de imágenes de más alta calidad. Consulte la figura 2 de la página 10 Consulte la figura 3 de la página 10 CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON TOMAS DE ENTRADA DIGITAL, PLATINA MD O PLATINA DAT Para hacer las conexiones de audio utilice cables digitales coaxiales de audio (de venta en el comercio). Consulte la figura 4 de la página 11 REPRODUCCIÓN DE UN DISCO REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO DVD Para empezar Conecte la alimentación del televisor, amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto. ) 3 Ponga un disco en la bandeja. ¡Asegúrese de que el disco esté correctamente asen- CD tado en el hueco correcto, con el lado de la etiqueta hacia arriba. 4 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la repro- ducción empezará desde el primer capítulo o pista del disco. [. . . ]