User manual FUNAI DVL500B

[. . . ] OWNER'S MANUAL 5 DISC DVD/CD PLAYER DVL500B INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 968-3429 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] No repeat playback. Search Title : 1/4 Chapter:__ / 17 Repeat [Chapter] Note ¡Playback from a desired title or Repeat [Off] chapter is not available with some DVDs. RANDOM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program setting menu screen will appear. For audio CDs ¡The whole disc or a disc or a single track is played back repeatedly. ¡Pressing the REPEAT button cycles the display on the screen through All, Disc, Repeat Track and Off. Repeat [All] 2 Press the MODE button again. ¡1 DISC RANDOM screen will The whole Disc is played back repeatedly. The current Disc is played back repeatedly. The current Track is played back repeatedly. Playbacks the current disc at random. Audio CD Random [1 Disc] Repeat [Disc] Start : PLAY Random [All Disc] : MODE Repeat [Track] Repeat [Off] 3 Press the MODE button again. ¡ALL DISC RANDOM screen will appear. Playbacks all discs at random. Audio CD Random [All Disc] Start : PLAY Exit : MODE If the REPEAT button is pressed once during program/random playback, the program/random playback is performed repeatedly. If the REPEAT button is pressed again, the current track is played back repeatedly. Notes ¡Repeat playback is not available with some discs. ¡If the REPEAT setting will be cleared when moving 4 After step 2 or 3, press the PLAY button. Random playback will then start. Notes ¡Program playback is not available during random playback. ¡MODE button will not work during tray is opened. to other title, chapter or track. ­ 16 ­ EN 9F21 A-B REPEAT DVD CD 3 Press the numeric buttons to enter the desired track numbers. ¡The total playback time for the Audio CD Program Total [Track] 1 [Time] 0:02:16 2-3 selected tracks will appear on the TOTAL line. ¡You can program more tracks by 1 Press the A-B REPEAT button during playback. proceeding the steps 2 and 3 repeatedly. ¡The starting point (A) will then be Repeat [A- ] ¡To cancel the last programmed selected. You can define a section to be played back repeatedly. Disc [CD] 2/5 Track 3 / 10 Start : PLAY Delete : CLEAR Random : MODE Exit : RETURN Audio CD Program Total [Track] 2 [Time] 0:06:40 2-3 4-7 Disc [CD] Track 4/5 7 / 11 Start : PLAY Delete : CLEAR Random : MODE Exit : RETURN 2 Press the A-B REPEAT button again at the end point (B) of the desired section. ¡The selected section will be Repeat [A-B] 4 Press the PLAY button. ¡Playback will start in the programmed order. ¡While the program is being played back, the STOP played back repeatedly. 3 To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF. Repeat [ off ] Notes ¡With DVDs, the A-B repeat section can be set only within the current title. ¡With audio CDs, the A-B repeat section can be set button works as follows. Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. Press the STOP button twice and then the PLAY button again, playback will restart from the first tune in the program in the usual way. Press the STOP button three times and then the PLAY button again, playback will restart from the track in the usual way. (Program cleared) Notes ¡MODE button will not work during tray is opened. ¡Adding programs is not possible during program within the current track. ¡A-B repeat is not available with some scenes in DVD. ¡To cancel the A point which was set, press RETURN button. playback. You must stop the current playback before such operations can be carried out. ¡Press the CLEAR button to cancel a program. The PROGRAM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program screen will appear Audio CD Program Total [Track] ­­ [Time] 0:00:00 Disc [CD] Track Start : PLAY Random : MODE 1/5 1 / 15 Delete : CLEAR Exit : RETURN most recently entered program will then be deleted. ¡Numbers which exceed the number of tracks on the disc in the tray are not accepted. ¡Playback from a desired track and random playback are not available during program playback. ¡Program settings are cleared when the power is and become waiting mode for DISC number input. turned off or the disc loading tray is opened. ¡If the track no. [. . . ] ¡La bandeja del disco deseado se mueve a la posición delantera. menú de títulos, el menú tal vez aparezca en la pantalla. En este caso, consulte "UTILIZACIÓN DEL MENÚ DE TÍTULOS". 4 Ponga un disco en la bandeja. ¡Asegúrese de que el disco esté correctamente asen- 6 Pulse el botón STOP para detener la reproducción. EN 9F21 ­ 31 ­ LIMITED WARRANTY Funai Corporation will exchange or repair this product, at its option, in the event of defect in materials or workmanship as follows: EXCHANGE DURATION: 1-90 DAYS: FUNAI CORPORATION will exchange for a new unit without charge for a period of ninety (90) days from the date of original retail purchase. 91-365 DAYS: FUNAI CORPORATION will exchange for a factory-service-to-new-condition unit for a charge of $49. 00 for the period of ninety one (91) days to three hundred sixty five (365) days from the date of original retail purchase. REPAIR DURATION: LABOR: PARTS: FUNAI CORPORATION will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. FUNAI CORPORATION will provide parts to replace defective parts without charge for a period of one (1) year from the date of original retail purchase. [. . . ]