User manual FUNAI EWC09D5

[. . . ] OWNER'S MANUAL "EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP. , PARSIPPANY, NEW JERSEY, U. S. A. " 9-INCH COLOR TV/DVD EWC09D5 EWC09D5 B INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-256-2487. Or visit our WEB SITE at http://www. EmersonAudioVideo. com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. [. . . ] 2 Press [FWD g] or [REV h]. ¡" STEP BY STEP PLAYBACK DVD-V 1 During playback, hit [PAUSE F]. ¡Playback will pause and sound will be muted. 1" or " 1" appears on the screen. 3 To select another speed, repeat step 2 until your required speed appears on the screen. ¡Slow forward or reverse speed varies with the disc. 2 The disc goes forward by one frame each time [PAUSE F] is hit. Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2). ¡When you use buttons on the front panel, press and 3 To exit step by step playback, hit [PLAY O]. hold [SEARCH h / g] for a few seconds. 4 To return to normal playback, hit [PLAY O]. ­ 20 ­ EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons TIME SEARCH DVD-V CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. 1 Press the Number buttons to enter the desired Track Number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), hit a single number (eg. 2 Within 30 seconds, enter a desired disc time using the Number buttons. ¡Playback will start at the specified time. ¡Hit [CLEAR] to erase the incorrect input. ¡When there is no need to enter a number, "0" track 3, hit [3]). ¡To play track 26, hit [+10], [2], [6]. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes. Using [SEARCH MODE] 1 Hit [SEARCH MODE]. ¡The Track search display appears. 2 Within 30 seconds, select a desired track number using the Number buttons. ¡For single digits hit [0] first, if the total track of the MARKER SETUP SCREEN DVD-V CD disc is more than 10. ¡Playback will start at the selected track. Use markers to memorize your favorite places on a disc. 1 Hit [SEARCH MODE] four times (CD: three times) during playback. ¡The display screen and Markers will appear on the Using [SKIP H / G] During playback, hit [SKIP G] to move the next track. Hit it repeatedly to skip subsequent tracks. Hit [SKIP H ] to go back to beginning of the current track. Hit it repeatedly to go to the previous tracks. ¡If [SKIP H / G ] is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE: ¡[SKIP H / G ] are not operative when playback is stopped. TV screen. 2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "- - - - : - - : - -" appears in the display. 3 When you reach the desired point, hit [ENTER]. ¡The title or track and elapsed playing time will appear in the TV screen. TITLE / CHAPTER SEARCH DVD-V 1 Hit [SEARCH MODE] once for the Chapter search, twice for the Title search during playback. _ /2 4 To return to the Marker later, hit [SEARCH MODE] four times (CD: three times) during playback and [s / B] to choose the desired marker, then hit [ENTER]. NOTES: ¡Operations which erase all Markers: 2 Enter the desired chapter/title number using the Number buttons. ¡Playback will start at the selected chapter or title. ¡Hit [CLEAR] to erase the incorrect input. ¡For single digits hit [0] first, if the total chapter or ­ Opening the disc tray ­ Turning off the power ­ Hitting [SELECT] ­ Selecting "AC" at step 2 and hitting [ENTER] ¡To clear a marker: ­ Press [s / B], position the cursor on to the marker number and hit [CLEAR]. [. . . ] ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú podrá aparecer en la pantalla. 2 Si no existe la función, puede aparecer el símbolo en la pantalla de TV. 3 Si existe un menú de disco en el disco, el idioma de audio, opciones de subtítulos, capítulos para el título y otras opciones aparecerán para su selección. 4 Presione [K / L / s / B] para seleccionar un ítem y presione [ENTER] para confirmar la selección. 5 Presione [STOP C] para detener la reproducción. REANUDACIÓN DVD-V 1 Durante la reproducción, presione [STOP C]. ¡Aparecerá el mensaje de continuación en la pantalla CD de TV. 2 Presione [PLAY O], la reproducción continuará desde el punto en el que se paró la reproducción. ¡Para cancelar la continuación, presione dos veces [STOP C]. ¡Si se apaga la unidad, se cancelará la función de con- tinuación. ­ 38 ­ ES MEMO ­ 39 ­ ES LIMITED WARRANTY FUNAI CORP. [. . . ]