User manual FUNAI EWC20D4

[. . . ] OWNER'S MANUAL "EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP. , PARSIPPANY, NEW JERSEY, U. S. A. " COLOR TV/DVD EWC20D4 (20 inch) SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner's Manual Owner's Manual INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. registered mark. NE221UD 2 AA Batteries 0EMN02487 If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-256-2487. Or visit our WEB SITE at http://www. funai-corp. com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] ¡For MP3, the speed is fixed at ×8. repeatedly to select the required forward or reverse speed: x2, x8, x50, x100. 1 During playback, press STOP. ¡Resume message will appear on the TV screen. 2 Press PLAY, playback will resume from the point at which playback was stopped. ¡To cancel resume, press STOP twice. ¡If turn off the TV/DVD, resume function will be cancelled. 2 To return to normal playback, press PLAY. Note for using buttons on the main unit: During playback, press and hold down the SKIP G / SEARCH g or SKIP H /SEARCH h on the TV/DVD for a few seconds to begin Search in x2 speed. Press and hold down again to change speed to x8. Repeat this procedure to change to x50 and x100. PAUSE DVD-V CD 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 2 To continue playback, press PLAY. SLOW FORWARD / SLOW REVERSE DVD-V 1 During playback, press PAUSE. 3 Press FWD g or REV h repeatedly to select the required speed: 1/16, 1/8, 1/2 of the normal playback. STEP BY STEP PLAYBACK DVD-V 1 During playback, press PAUSE. ¡Playback will pause and sound will be muted. 2 The disc goes forward by one frame each time PAUSE is pressed. 4 To return to normal playback, press PLAY. Note for using buttons on the main unit: Press PAUSE, then, press and hold down the SKIP G / SEARCH g or SKIP H/SEARCH h on the TV/DVD for a few seconds to begin Search in 1/16 speed of the normal playback. Press and hold down again to change speed to 1/8. Repeat this procedure to change to 1/2. 3 To exit step by step playback, press PLAY. ­ 21 ­ EN 0C28 SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. Using the number buttons on the remote control TIME SEARCH DVD-V CD 1 During playback, press SEARCH MODE three times (CD: twice) to display the Time Search on the TV screen. 1 Press the number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the number buttons. ¡Playback will start at the specified time. ¡Press CLEAR to erase the incorrect input. (eg. track 3, press 3). ¡To play track 26, press +10, 2, 6. MARKER SETUP SCREEN DVD-V CD Using SEARCH MODE 1 Press SEARCH MODE. ¡The Track search display appears. 2 Within 30 seconds, select a desired track number using the number buttons. ¡Playback will start at the selected track. Use markers to memorise your favorite places on a disc. 1 Press SEARCH MODE four times (CD: three times) during playback. [. . . ] Si la reproducción no empieza automáticamente, pulse PLAY. ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú aparecerá en la pantalla. 5 Pulse el botón STOP para detener la reproducción. El sintonizador se detiene en el canal memorizado más bajo. · Cuando se activa AUTOPROGRAMACION DE CA, donde no hay entrada de señal del televisor, aparecerá "NO HAY SEÑAL DE TV" en la pantalla después de terminar la búsqueda de canales. [. . . ]