User manual FUNAI F100DB

[. . . ] If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 242-7158 Please read before using this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. FCC WARNING- This equipment may generate or use radio frequency energy. [. . . ] Stays on when the repeat function is on. Lights up when a DVD is inserted on the tray. note ¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's If using this DVD player to play back a DVD in a 5. 1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. 6] Notes ¡Be sure to turn off the power to all components in the system before connecting another component. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct. ) Notes ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. ¡If a disc is dirty or has scratches, the pictures may ¡The power will turn on. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. Program signals, playback may start from the second title, or it may skip these titles. ¡Make sure the disc is sitting properly in the correct Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. Then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button. ¡When you play back the DVD which a title menu is With a DVD containing a title menu, you can select desired titles from the menu. Press 'PLAY' to play from here To play beginning, press 'STOP' first and the 'PLAY'. From the point where the previous playback session was stopped. STOP button twice or by opening the disc loading tray. Played with sound muted each time the button is pressed. Button cycles the playback speed in three steps. [. . . ] Read the description in this Owner's Manual for details on correct operations. ¡Playback from a desired track and random playback are not available during program playback. Should your DVD player become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. [. . . ]