User manual FUNAI F13TRG1

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] · Recording starts immediately when [REC/OTR] is hit. · When [REC/OTR] is hit 18 times, the unit returns to the normal recording mode. · To stop the OTR operation, hit [C STOP] on the unit or on the remote control. · To show the remaining time, hit [DISPLAY] on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear. ) · Recording stops when the display shows 0:00. · Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). · If the tape runs out before the end time, the unit will switch to the stop mode immediately, ejects the tape and turns itself off. · Even if [POWER] is hit during OTR, the unit continues recording. Time(s) 1 time 2 times 3 times 17 times Display 0:30 1:00 8:00 Recording length (normal recording) 30 minutes 60 minutes 480 minutes COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) TV/VCR You can make copies of video tapes made by friends or relatives for your enjoyment. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect your unit and a source (Playing) VCR using the following diagram. [This unit] B PLAY F. FWD D C STOP A EJECT HEADPHONE VIDEO L ­ AUDIO ­ R [Fig. 8] Audio/Video cable (not supplied) [Ex: Source VCR or camcorder] AUDIO L OUT R VIDEO OUT IN IN 1 Select the channel to be recorded Press the Number buttons or [CH. NOTE: · If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 2 Select the tape speed Hit [SPEED] to select the desired tape speed (SP/SLP). 3 Begin OTR OTR (2 : 30) Hit [REC/OTR] on the unit as many times as needed. Confirm "TIMER PROGRAMMING" is pointed by hitting [K], then hit [ENTER]. · If you have not yet set the clock, "MANUAL CLOCK SET" appears. Then set the timer recording. 2 Select your desired program position (1 to 8) ­ TIMER PROGRAMMING ­ CH DATE B-/-/-/-/-/-/-/-/BEGIN END -:-:-:-:-:-:-:-:-:- -:- -:- -:- -:- -:- -:- -:- - Press [K / L] to select the desired program position, then hit [B]. 3 Set the channel number ­ TIMER PROGRAMMING ­ CH DATE ---B 61 -----/-/-/-/-/-/-/-/BEGIN END -:-:-:-:-:-:-:-:-:- -:- -:- -:- -:- -:- -:- -:- - Press [K / L] until the desired channel number appears (Example: CH61), then hit [B]. NOTE: · If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 4 Select once, every day or weekly recording ­ TIMER PROGRAMMING ­ CH DATE BEGIN END -:- -:- -:- -:- -:- -:- -:- -:- - For once recording : Hit [K] until the desired date appears. (Example: "7/04" for July 4th) Then hit [B]. - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 7/04 MON -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) CH DATE BEGIN END -:- -:- -:- -:- -:- -:- -:- -:- - ­ TIMER PROGRAMMING ­ Hit [L] until "EVRY DAY" appears, then hit [B]. - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 EVRY DAY -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - - For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday) Hit [L] until "EVRY" and your desired day of the week appear together, then hit [B]. CH DATE - - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:B 61 EVRY MON -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:- - -/- - - - - -:-:- -:- -:- -:- -:- -:- -:- -:- - ­ TIMER PROGRAMMING ­ BEGIN END - *Recording period is SHADED - 31 - EN 5 Set beginning hour ­ TIMER PROGRAMMING ­ CH DATE - - -/- - - - - - -/- - - - - - -/- - - - B 61 7/04 MON - - -/- - - - - - -/- - - - - - -/- - - - - - -/- - - - BEGIN END -:- -:- -:- 7:12PM -:- -:- -:- -:- -:-:-:-:-:-:-:-:- Press [K / L] until the desired hour appears. (Example: " 7, PM" for 7:30PM) Then hit [B]. 6 Set beginning minute ­ TIMER PROGRAMMING ­ CH DATE - - -/- - - - - - -/- - - - - - -/- - - - B 61 7/04 MON - - -/- - - - - - -/- - - - - - -/- - - - - - -/- - - - BEGIN END -:- -:- -:- 7:30PM -:- -:- -:- -:- -:-:-:-:-:-:-:-:- Press [K / L] until the desired minute appears. (Example: "30" for 7:30PM) Then hit [B]. NOTES: · The display will not be turned on automatically at the time the programmed recording begins. To watch the currently recorded TV program or to play a DVD disc, hit [POWER] and [SELECT] to choose the TV/VCR mode or the DVD mode. · If the tape runs out before the end time, the unit will switch to the stop mode immediately and the tape will be ejected. TIMER PROGRAM EXTENSION To shift the time schedule of an automatic timer recording. 3)Hit [RECORD] and select the desired program using [K / L]. [. . . ] ¡Si la reproducción no comienza automáticamente, presione [PLAY O]. ¡Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú podrá aparecer en la pantalla. 5 Presione [STOP C] para detener la reproducción. MENÚ DE DISCO DVD-V 1 Presione [DISC MENU]. ¡Aparecerá el menú principal de DVD. ¡Si no existe la función, puede aparecer el símbolo en la pantalla de TV. ¡Si el menú de disco existe en el disco, aparecerán el 1 Seleccione el canal a grabar Presione los botones numéricos o [CH. [. . . ]