User manual FUNAI F2840L

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] These may damage the disc and the unit may not read it correctly. *11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region format can only be played back on unit with the same region code. UNPLAYABLE DISCS NEVER play back the following discs. DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3 ¡ On the following disc, the sound MAY NOT be heard. Super Audio CD NOTE: Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio CD layer cannot be delivered. ¡Any other discs without compatibility indications ¡ - 19 - EN PLAYING A DISC BASIC PLAYBACK DVD-V Getting started ¡Turn on the power of amplifier and any other com- GENERAL FEATURES CD DVD-V DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or [K / L / s / B] to highlight your selection in the DVD main menu and hit [ENTER] to confirm. NOTES: ¡Select DVD mode by hitting [SELECT], then operate the DVD functions. ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. ponents, if necessary. 1 Hit [POWER]. 2 Hit [OPEN/CLOSE A] to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DISC MENU DVD-V 1 Hit [DISC MENU]. ¡" g 1" or "h 1" appears on the screen. picture across the screen. 4 To exit zoom mode, hit [ZOOM] to OFF. CD NOTES: ¡Zooming function does not work while disc menu is shown. ¡Zooming function is not available on some discs. ¡It may take several seconds to slide the zoomed pic- ture. ¡The picture may be distorted if you operate other 2 To select another speed, repeat step 1 until your required speed number appears on the screen. ¡For DVDs, fast forward/reverse search speed is dif- functions repeatedly (ex. [PAUSE F] or [REV h], etc. ) in the zoom mode. ferent depending on the disc. Approximate speed is 1(×2), 2(×8), 3(×20), 4(×50) and 5(×100). ¡For Audio CDs approximate speed is 1(×2), 2(×8) and 3(×30). ¡When you press buttons on the front panel, press and hold [SEARCH h / g] for a few seconds. 3 To return to normal playback, hit [PLAY O]. - 21 - EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. TIME SEARCH DVD-V CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons 1 Press the Number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the Number buttons. ¡Playback will start at the specified time. [. . . ] K / L] para seleccionar CH3 o CH4 de acuerdo con el ajuste de canal de salida del dispositivo y seleccione el canal deseado en el dispositivo. PARA VER UNA ENTRADA EXTERNA · Cuando se conecta un equipo externo en las tomas de entrada AUDIO/VIDEO frontales, presione [SELECT] o [CH. K / L] repetidamente hasta que aparezca "AUX" en la pantalla. - 37 - ES SECCIÓN DE DVD REPRODUCCIÓN BÁSICA DVD-V Para empezar ¡Conecte la alimentación del amplificador y otros MENÚ DE DISCO DVD-V 1 Presione [DISC MENU]. ¡Aparecerá el menú principal de DVD. ¡Si no existe la función, puede aparecer el símbolo en la pantalla de TV. [. . . ]