User manual FUNAI F2860L

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] Press the PLAY/K or STOP/L button to point to "V-CHIP SET UP". Then, press the F. FWD/B button. 2 Select "MPAA RATING" ­ V-CHIP SET UP ­ TV RATING B MPAA RATING Press the PLAY/K or STOP/L button to point to "MPAA RATING". Then, press the F. FWD/B button. When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the F. FWD/B button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. · When you select [TV-Y7]: Press the STOP/L or PLAY/K button to select "FV" (Fantasy Violence). Then, press the F. FWD/B button to select [BLOCK] or [VIEW]. · When you select [TV-PG], [TV-14] or [TV-MA]: Press the STOP/L or PLAY/K button to select "D"(Suggestive Dialog), "L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then, press the F. FWD/B button to select [BLOCK] or [VIEW]. Note: When you select [TV-MA], "D" does not appear on the TV screen. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button. Press the PLAY button to start the Repeat Play. · Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. · If the Rental mode is set [ON], the "RENTAL PLAY B" display has priority. 3 To stop playback STOP Press the STOP button when playback is completed. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F. FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. - 17 - EN 9I03 SEARCH PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F. FWD or REW button during playback. (in the SP / LP / SLP modes) 2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. 3)Press the PLAY button to return to normal speed. NOTES: · Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. [. . . ] 2) Pulse el botón PLAY/K o STOP/L para indicar "AJUSTE MANUAL RELOJ". 3) Pulse el botón PLAY/K o STOP/L hasta que aparezca el mes deseado. (Ejemplo: Mayo - 05) Luego, pulse el botón F. FWD/B. 4) Pulse el botón PLAY/K o STOP/L hasta que aparezca el día del mes deseado. [. . . ]