User manual FUNAI F3809B

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3 ¡ On the following disc, the sound MAY NOT be heard. Super Audio CD NOTE: Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio CD layer cannot be delivered. ¡Any other discs without compatibility indications ¡ ­ 19 ­ EN PLAYING A DISC BASIC PLAYBACK DVD-V Getting started ¡Turn on the power of amplifier and any other com- GENERAL FEATURES CD DVD-V DVD may contain menus to navigate the disc and access special features. Press appropriate the Number buttons K or [K / L / s / B] to highlight your selection in the DVD main menu and hit [ENTER] to confirm. NOTES: ¡Select DVD mode by hitting [SELECT] on the remote control. Then hit [PLAY B] or [OPEN/CLOSE A] before you operate the DVD functions. ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. ponents, if necessary. 1 Hit [STANDBY-ON]. 2 Hit [OPEN/CLOSE A] to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DISC MENU DVD-V 1 Hit [DISC MENU] on the remote control. ¡The tray will close automatically and playback will then start from the first chapter or track of the disc. ¡Slow forward or reverse speed varies with the disc. 2 The disc goes forward by one frame each time [PAUSE F] is pressed. Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2). ¡When you press buttons on the front panel, press 3 To exit step by step playback, hit [PLAY B]. and hold [SEARCH h / g] for a few seconds. 4 To return to normal playback, hit [PLAY B]. ­ 21 ­ EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons on the remote control TIME SEARCH DVD-V CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. 1 Press the Number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the Number buttons. ¡Playback will start at the specified time. ¡Hit [CLEAR] to erase the incorrect input. ¡When there is no need to enter a number, "0" (eg. track 3, hit [3]). ¡To play track 26, hit [+10], [2], [6]. Using [SEARCH MODE] appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes. 1 Hit [SEARCH MODE]. ¡The Track search display appears. 2 Within 30 seconds, select a desired track number using the Number buttons. [. . . ] · La unidad puede reconocer los canales de TV de cable para que sean canales de TV de antena con las condiciones de recepción. En este caso, pruebe nuevamente con el prefijado automático en las condiciones de recepción fina. · La programación de canal en memoria NO es necesario cuando conectado a una caja de cable o caja de satélite. Sólo tiene que seleccionar el canal de entrada para la caja de cable o caja de satélite (por ejemplo CA3) en la unidad, después seleccione el canal a ver en la caja de cable o caja de satélite. NO HAY SEÑAL DE TV 4 Presione [PLAY B]. [. . . ]