User manual FUNAI F3809D

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] · This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format). UNPLAYABLE DISCS NEVER play back the following discs. DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3 ¡ On the following disc, the sound MAY NOT be heard. Super Audio CD NOTE: Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio CD layer cannot be delivered. ¡Any other discs without compatibility indications ­ 19 ­ ¡ EN PLAYING A DISC BASIC PLAYBACK DVD-V Getting started ¡Turn on the power of amplifier and any other GENERAL FEATURES CD DVD-V DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or [K / L / s / B] to highlight your selection in the DVD main menu and hit [ENTER] to confirm. NOTES: ¡Select DVD mode by hitting [SELECT], then operate the DVD functions. ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. components, if necessary. 1 Hit [STANDBY-ON]. 2 Hit [OPEN/CLOSE A] to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DISC MENU DVD-V 1 Hit [DISC MENU]. ¡If the feature is not available, symbol may appear on the TV screen. ¡If disc menu is available on the disc, audio 4 Hit [PLAY B]. [PAUSE F] or [h], etc. ) in the zoom mode. ferent depending on the disc. Approximate speed is 1(×2), 2(×8), 3(×20), 4(×50) and 5(×100). ¡For Audio CDs approximate speed is 1(×2), 2(×8) and 3(×30). ¡When you press buttons on the front panel, press and hold [SEARCH h / g] for a few seconds. 3 To return to normal playback, hit [PLAY B]. ­ 21 ­ EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. TIME SEARCH DVD-V CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons 1 Press the Number buttons to enter the desired track number. ¡Playback will start at the selected track. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the Number buttons. ¡Playback will start at the specified time. ¡Hit [CLEAR] to erase the incorrect input. ¡When there is no need to enter a number, "0" (eg. track 3, hit [3]). ¡To play track 26, hit [+10], [2], [6]. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes. Using [SEARCH MODE] 1 Hit [SEARCH MODE]. ¡The track search display appears. MARKER SETUP SCREEN DVD-V CD Use markers to memorize your favorite places on a disc. 2 Within 30 seconds, select the desired track number using the Number buttons. [. . . ] ¡La alimentación se conectará. 2 Presione [OPEN/CLOSE A] para abrir la bandeja de carga del disco. 3 Ponga el disco deseado en la bandeja, con la etiqueta hacia arriba. REANUDACIÓN DVD-V 1 Durante la reproducción, presione 4 Presione [PLAY B]. ¡La bandeja se cerrará automáticamente y la [STOP C]. ¡Aparecerá el mensaje de continuación en la pantalla CD reproducción comenzará desde el primer capítulo o pista del disco. ¡La reproducción también empieza cerrando manualmente la bandeja del disco o presionando [OPEN/CLOSE A]. [. . . ]