User manual FUNAI F9TRF1

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] Some operations can be carried out using the menu bar on the TV screen. CD ponents, if necessary. 1 Press POWER. 2 Press OPEN/CLOSE to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DISC MENU DVD-V 1 Press DISC MENU on the remote control. ¡The tray will close automatically and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. ¡When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to "TITLE MENU". 2 If the feature is not available, may appear on the TV screen. symbol 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press Arrow (K/L/s/B) to select an item 5 Press STOP to stop playback. NOTES ¡When the DVD mode has been switched to the TV and ENTER to confirm selection. TITLE MENU DVD-V 1 Press TITLE on the remote control. 2 If the feature is not available, may appear on the TV screen. symbol mode, the DVD mode shuts down first and then TV picture and sound appears in about 4 seconds. Similarly, when POWER is pressed to turn off in the DVD mode, this mode shuts down first and then the TV/DVD's power is turned off. ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc. ¡With DVDs that use titles for playback program signals, playback may start from the second title or it may skip these titles. ¡For single digit tracks (1-9), press a single number (eg. track 3, press 3). ¡To play track 26, press +10, 2, 6. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the disc is less than 10 minutes. Using SEARCH MODE 1 Press SEARCH MODE. ¡The Track search display appears. MARKER SETUP SCREEN DVD-V CD 2 Within 30 seconds, select a desired track number using the number buttons. ¡For single digits press 0 first, if the total track of the Use markers to memorize your favorite places on a disc. disc is more than 10 tracks. ¡Playback will start at the selected track. 1 Press SEARCH MODE four times (CD: three times) during playback. ¡The display screen and Markers will appear on the Using PREV/NEXT H G During playback, press NEXT G to move the next track. Press it repeatedly to skip subsequent tracks. Press PREV H to go back to beginning of the current track. Press it repeatedly to go to the previous tracks. ¡If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE ¡PREV/NEXT H G are not available when playback is stopped. TV screen. 2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "- - - - : - - : - -" appears in the display. 3 When you reach the desired point, press ENTER. ¡The title or track and elapsed playing time will appear in the TV screen. 4 To return to the Marker later, press SEARCH MODE four times (CD: three times) during playback and Arrow (s/ B) to choose the desired marker, then press ENTER. TITLE / CHAPTER SEARCH DVD-V 1 Press SEARCH MODE once for the Chapter search, twice for the Title search during playback. _ /2 NOTES ¡Opening the disc tray or turning off the power or selecting AC at step 2 and pressing ENTER will erase all Markers. [. . . ] A continuación, pulse el botón ENTER. El sintonizador busca y memoriza todos los canales activos en su localidad. B AUTOPROGRAMACION DE CA. 3 Después de buscar 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. Si la reproducción no empieza automáticamente, pulse PLAY. [. . . ]