User manual FUNAI FE226G

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] The following discs cannot be played back on this TV/DVD. ¡DVD with region codes other than 1 or ALL ¡DVD-ROM ¡DVD-RAM (Never play back, otherwise malfunc- [MP3] Data on an MP3 is divided into sections called "groups", and then into subsections called "tracks", each of which is given a group or track number. Example Group 1 Track 1 Track 2 Track 3 Track 4 tion may result. ) ¡CD-ROM ¡VSD ¡CDV (Only plays back the audio part. ) ¡CD-G (Only plays back the sound. ) ¡CD-I (Never play back, otherwise malfunction Group 2 Track 5 Track 6 may result. ) ¡SACD ¡Photo CD (Never play back, otherwise malfunc- tion may result. ) ¡Video CD (Never play back, otherwise malfunc- tion may result. ) Any other discs without compatibility indications. ­ 19 ­ EN 0C28 PLAYING A DISC BASIC PLAYBACK DVD-V Getting started ¡Turn on the power of amplifier and any other com- GENERAL FEATURES MP3 DVD-V DVD may contain menus to navigate the disc and access special features. Press appropriate number buttons or use Arrow (K/L/s /B) to highlight your selection in the DVD main menu and press ENTER to confirm. NOTES ¡Select DVD mode by pressing SELECT on the remote control. Then press PLAY or OPEN/CLOSE before you operate the DVD functions. ¡Unless stated, all operations described are based on CD ponents, if necessary. 1 Press POWER. 2 Press OPEN/CLOSE to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. remote control use. Some operations can be carried out using the menu bar on the TV screen. DISC MENU DVD-V 1 Press DISC MENU on the remote control. ¡The tray will close automatically and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. ¡When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to "TITLE MENU". 2 If the feature is not available, may appear on the TV screen. symbol 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press Arrow (K/L/s /B) to select an item and ENTER to confirm selection. 5 Press STOP to stop playback. NOTES ¡When the DVD mode has been switched to the TV TITLE MENU DVD-V 1 Press TITLE on the remote control. 2 If the feature is not available, may appear on the TV screen. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the number buttons. ¡Playback will start at the specified time. ¡Press CLEAR to erase the incorrect input. ¡When there is no need to enter a number, "0" (eg. track 3, press 3). ¡To play track 26, press +10, 2, 6. appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the disc is less than 10 minutes. Using SEARCH MODE 1 Press SEARCH MODE. ¡The Track search display appears. MARKER SETUP SCREEN DVD-V CD 2 Within 30 seconds, select a desired track number using the number buttons. ¡Playback will start at the selected track. Use markers to memorise your favorite places on a disc. 1 Press SEARCH MODE four times (CD: three times) during playback. ¡The display screen and Markers will appear on the Using PREV/NEXT (H/G) During playback, press NEXT G to move the next track. Press it repeatedly to skip subsequent tracks. Press PREV H to go back to beginning of the current track. Press it repeatedly to go to the previous tracks. [. . . ] A continuación, pulse el botón ENTER. 2 Pulse el botón OPEN/CLOSE. ¡La bandeja de carga del disco se abrirá. 3 Ponga el dlsco en la bandeja con el lado de la eliguta hacia arriba. ­ AJUSTE DE CANAL ­ 2 Empiece el prefijado automático AGREGAR/BORRAR (CATV) Pulse el botón K o L para señalar "AUTOPROGRAMACION DE CA". A continuación, pulse el botón ENTER. El sintonizador busca y memoriza todos los canales activos en su localidad. B AUTOPROGRAMACION DE CA. 3 Después de buscar 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. [. . . ]